Setup Flow For Usb Printing - Toshiba e-STUDIO 165 Quick Start Manual

Setup Flow for USB Printing

This equipment can be used as a printer using a USB cable. When it is connected using a USB
cable, setups at the initial stage are not required. When you have connected this equipment to
your computer and installed printer drivers, USB printing functions are enabled.
USB printing is not supported by Windows NT 4.0.
Setup Flow
Connect this equipment
Install the client software
Configuring the printer drivers
Connecting using a USB
cable
Connect this equipment to your computer using a USB cable.
Reference: Quick Start Guide for Printing Functions (this
manual)
• Chapter 3 "CONNECTING TO A COMPUTER"
Install the printer driver from the Client Utilities CD-ROM.
Reference: Printing Guide
• Chapter 2 "INSTALLING CLIENT SOFTWARE"
"Installing Client Software for Windows"
Configure the options and department codes.
Reference: Printing Guide
• Chapter 3 "PRINTING"
"Printing from Windows"
Windows Me
Windows 2000
Windows XP
Windows Server 2003
Description/Reference
P.24 "Connecting to the USB Port"
"Installing the Client Software for USB Printing"
"Before Using the Printer Driver"

Setup Flow for USB Printing

33