ASCOM D42 Configuration Manual page 30

Configuration Manual
Ascom d43 DECT Handset
PBX may or may not be set to pass display management text. The handset always looks for
this information according to the following priorities:
1 If the PBX sends display management text then this is used before any other source
of caller identification such as CLIP, the local phone book, or CNIP. The handset
displays the display management text as it is.
2 If the PBX is not configured to send display management text, but is configured to
send CLIP, CLIP is used to look up and resolve the calling party name from the local
phonebook. The handset can then display the name.
3 If no entry is found in the local phonebook and the PBX is configured to send the
calling party name in CNIP, the name is taken directly from CNIP. The handset can
then display the name.
4 If the PBX is configured only for CLIP and no name resolution was possible because
the local phonebook had no entry corresponding to the calling party number, only the
calling party extension number can be displayed in the handset.
NOTE: Caller name or number received as display management text will not be stored in the
Call list and cannot be used for local phone book queries. Only information received as
CLIP or CNIP can be used for these functions.
5.24.2 Display Management Parameter
If information about a caller exists in the local phonebook, a display management parameter
can be configured to show this information in addition to the information provided by the
display manager. The additional information is displayed as additional lines of text in the
handset display. The parameter is accessed through the WinPDM/Device Manager by
selecting:
Systems > System X > Display Management and Local Phonebook Name
The parameter can be set to one of the following values:
• Normal: The handset shows only the display management text.
• Add name internal and external call: Additional detail about the caller is displayed if
there is information about the caller in the local phonebook. If there is no entry for the
caller in the phonebook, only the display management text is displayed. This option
applies when both internal and external calls are received.
• Add name external call: Displays additional caller detail as described above, but only
when external calls are received.
10 Oct 2016 / Ver. A
5. Handset Configuration
TD 93120EN
27