Protect Registration From User Deletion; Emergency Call Numbers; Audio Adjustment; Headset Configuration - ASCOM D42 Configuration Manual

Dect handset
Table of Contents

Advertisement

Configuration Manual
Ascom d43 DECT Handset
the handset is being used in an environment where highly reflected metallic surfaces are
used in the construction of the locale.

5.17 Protect Registration from User Deletion

A registration can be protected from deletion via the handset menu by altering the
parameter "Protected flag". In a template or from the Number tab in WinPDM/Device
Manager, the parameter is found at:
Systems > System X > Registration data.

5.18 Emergency Call Numbers

Up to five different phone numbers may be reserved for emergency calls. These numbers
can always be called even when the phone or key locks are active.
NOTE: If emergency numbers of varying length are used, care must be taken to ensure that
longer numbers do not begin with the same digits and ordering used by a shorter
number. For example, if 124 and 1245 define two emergency numbers, the number
1245 cannot be used because 124 is always be evaluated and called before the
longer number can be entered. However, 5421 and 1256 would be allowed.
Emergency numbers are configured using the WinPDM/Device Manager and setting the
value of the parameter:
Settings > Emergency Call Numbers

5.19 Audio adjustment

Microphone gain and side tone can be configured to achieve optimal audio quality for each
working environment through the parameters:
Audio > Normal
• Normal side tone adjustment - Determines how much of the speakers voice that is fed
back to the speaker.
• Normal mic adjustment - Determines the microphone sensitivity, that is, how much
sound the microphone gains.
The parameter settings affect the "normal" mode, that is, the wired headset, Bluetooth
headset, handsfree and loudspeaking modes are unaffected.
For configuration of headset audio see,
NOTE: Changing these parameters may result in lower sound quality and high sound level.
Evaluate carefully before applying.

5.20 Headset Configuration

A headset is recommended if the handset is used frequently or if the user wants to have
both hands free. The headset comes in two versions, that is, microphone on boom and
microphone on cable.
5.20.1 Selection of Headset Type
To achieve optimal audio quality with the different headset types, it is recommended to set
the corresponding headset type. The default setting is "microphone on a boom", which
10 Oct 2016 / Ver. A
5. Handset Configuration
5.20 Headset
Configuration.
TD 93120EN
24

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the D42 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Table of Contents

Save PDF