ASCOM D42 Configuration Manual page 28

Configuration Manual
Ascom d43 DECT Handset
means that the audio is optimized for using a headset with microphone on a boom. The
headset type can be changed as follows:
1 Select Connections > Headset.
2 In the Headset type drop-down list, select the corresponding headset type to be
used.
If "User headset profile" is selected, see section
5.20.2 User Headset Profile
If the preconfigured headset profiles does not match the headset or the audio performance
is unsatisfactory, a headset profile can be configured in the following way:
1 Select Connections > Headset > User headset profile.
2 In the Name of user headset profile field, enter an appropriate name. The name is
visible and selectable in the handset menu.
3 In the Headset mic adjustment drop-down list, select the microphone gain to be used.
4 In the Headset speaker adjustment drop-down list, select the speaker gain to be
used.
NOTE: Changing these parameters may result in a very high sound level which can cause
hearing damage. In addition, these parameters may result in lower sound quality such
as noise and echo. If the audio problems occur, it is noticeable for the person listening
on the conversation. Evaluate carefully before applying.
10 Oct 2016 / Ver. A
5. Handset Configuration
5.20.2 User Headset Profile.
TD 93120EN
25