HP Analog Fax Accessory 300 Fax Manual page 39

All settings made on the Settings screen are temporary settings,
Note
enabled for the current fax only.
4
Notify/Notification changes the notification setting for the current fax
Note
only. To change the default setting, see "To schedule fax call report
printing" on page 66.
5
6
7
8
9
10 Touch OK to return to the Fax screen. The speed dial number(s)
11 Touch Start to send the fax. You can either touch the Start button
ENWW
c When all settings are completed, touch OK to return to the
Settings screen.
On the Settings screen touch Fax Settings to make adjustments
to the following settings:
• Sharpness—enhances text and graphic edges. For additional
information, see "Changing the sharpness setting" on page 42.
• Background—removes a background that might be a result
from copying color paper. For additional information, see
"Changing the background setting" on page 43.
• Notify/Notification—changes how you are notified of the
status of the fax transmission (that is, if the fax was sent or if
an error occurred and the fax was not sent). For the
HP LaserJet 4345mfp and the 4730mfp, access to the
notification settings is through the Notify button located on the
main fax screen. For additional information, see "Changing
notification settings" on page 36.
When all settings are completed, touch OK to return to the
Settings screen.
On the Settings screen, to adjust the lightness/darkness of the
fax you are sending, touch the Light or Dark arrows.
When all settings are completed on the Settings screen, touch
OK to return to the Fax screen.
Touch Speed Dial to display the BASIC screen.
Touch the check box in front of the speed dial name you wish to
use.
will be listed in the Fax Recipient screen.
on the touch screen or press the green Start button on the control
panel.
Sending faxes 31