Chrysler 200 2017 Owner's Manual page 515

3. Remove the brace by removing the four fasteners and
loosening the 5th inboard fastener.
4. Twist the front turn signal lamp socket assembly coun-
terclockwise, and then remove the front turn signal
lamp assembly from the lamp housing.
Front Turn Signal Lamp Socket
5. Pull the bulb out of the socket and insert the replace-
ment bulb.
MAINTAINING YOUR VEHICLE 513
6. Install the front turn signal lamp socket assembly into
the housing, and rotate the front turn signal lamp socket
clockwise to lock it in place.
7. Install air cleaner filter housing, if removed.
8. Install brace, brace bolts and tighten as shown.
Brace Bolt Tightening Sequence
9. Install beauty cover.
7