Page 2
With respect to any Vehicles Sold in Canada, the name This manual illustrates and describes the operation of Chrysler Group LLC shall be deemed to be deleted and features and equipment that are either standard or op- the name Chrysler Canada Inc. used in substitution tional on this vehicle.
4 INTRODUCTION INTRODUCTION When it comes to service, remember that your authorized Congratulations on selecting your new Chrysler Group dealer knows your vehicle best, has factory-trained tech- LLC vehicle. Be assured that it represents precision nicians and genuine MOPAR parts, and cares about workmanship, distinctive styling, and high quality - all your satisfaction.
6 INTRODUCTION WARNINGS AND CAUTIONS This Owner’s Manual contains WARNINGS against op- erating procedures that could result in a collision or bodily injury. It also contains CAUTIONS against proce- dures that could result in damage to your vehicle. If you do not read this entire manual, you may miss important information.
INTRODUCTION 7 VEHICLE MODIFICATIONS/ALTERATIONS WARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to a accident resulting in serious injury or death. Stamped VIN Location NOTE: It is illegal to remove or alter the VIN.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE CONTENTS A Word About Your Keys ....12 Vehicle Security Alarm — If Equipped ..18 Ignition Key Removal .
Page 12
10 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Remote Open Window Feature — Power Windows ..... . . 34 If Equipped ......25 Power Window Switches .
Page 13
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 11 Rear Seat Belts ..... . . 49 Air Bag System Components ... . . 59 Seat Belts In Passenger Seating Positions .
12 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE A WORD ABOUT YOUR KEYS The authorized dealer that sold you your vehicle has the key code numbers for your vehicle locks. These numbers can be used to order duplicate keys from your authorized dealer.
Page 15
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 13 NOTE: • If you try to remove the key before you place the shift lever in PARK, the key may become trapped tempo- rarily in the ignition switch lock cylinder. If this occurs, rotate the key to the right slightly, then remove the key as described.
14 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • For vehicles equipped with the Electronic Vehicle In- CAUTION! formation Center (EVIC), the power window switches, radio, hands–free system (if equipped), and power An unlocked car is an invitation to thieves. Always outlets will remain active for up to 10 minutes after the remove key from the ignition and lock all doors ignition switch is turned to the LOCK position.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 15 You can insert the key with either side up. To lock the NOTE: A key which has not been programmed is also door, turn the key rearward. To unlock the door, turn the considered an invalid key even if it is cut to fit the key forward.
16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE At the time of purchase, the original owner is provided CAUTION! with a four-digit Personal Identification Number (PIN). The PIN is required for authorized dealer replacement of The Sentry Key Immobilizer system is not compat- keys.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 17 2. Insert the first valid key into the ignition switch. Turn The new Sentry Key is programmed. The Remote the ignition switch to the ON/RUN position for at least Keyless Entry (RKE) transmitter will also be pro- three seconds, but no longer than 15 seconds.
18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • This device must accept any interference that may be Rearming The System received, including interference that may cause unde- If something triggers the alarm, and no action is taken to sired operation. disarm it, the Vehicle Security Alarm will turn off the horn after three minutes, turn off all of the visual signals VEHICLE SECURITY ALARM —...
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 19 Security Alarm is arming. During this period, if a door is NOTE: • The driver’s door key cylinder and the trunk button on opened, the ignition switch is turned to ON/RUN, or the power door locks are unlocked in any manner, the the RKE transmitter cannot arm or disarm the Vehicle Vehicle Security Alarm will automatically disarm.
20 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If the Vehicle Security Alarm is armed and the battery The interior lights will fade to off after approximately becomes disconnected the Vehicle Security Alarm will 30 seconds or they will immediately fade to off once the remain armed when the battery is reconnected.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 21 NOTE: To Unlock The Doors • The line of transmission must not be blocked with Press and release the UNLOCK button on the RKE metal objects. transmitter once to unlock the driver’s door, or twice to unlock all doors.
Page 24
22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • For vehicles not equipped with the EVIC, perform the NOTE: If there is no key in the ignition switch, pressing following procedure: the LOCK button on the RKE transmitter while you are inside the vehicle will activate the Vehicle Security Alarm 1.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23 • For vehicles not equipped with the EVIC, perform the NOTE: If there is no key in the ignition switch, pressing following procedure: the LOCK button on the RKE transmitter while you are in the vehicle will activate the Vehicle Security Alarm 1.
24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Sound Horn With Lock 3. Test the feature while outside of the vehicle by press- This feature will cause the horn to chirp when the doors ing the LOCK button on the RKE transmitter with the are locked with the RKE transmitter.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 25 Remote Open Window Feature — If Equipped The Panic Alarm will stay on for three minutes unless The RKE remotely lowers both driver and passenger you turn it off by pressing the PANIC button a second front windows simultaneously.
26 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 1. With the RKE transmitter buttons facing down, use a 2. Remove and replace the battery. Avoid touching the flat blade screwdriver to pry the two halves of the RKE new battery with your fingers. Skin oils may cause transmitter apart.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 27 If your RKE transmitter fails to operate from a normal How To Use Remote Start distance, check for these two conditions. All of the following conditions must be met before the engine will remote start: 1.
Page 30
28 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Remote Start Aborted — Hood Ajar WARNING! • Remote Start Aborted — Trunk Ajar • Do not start or run an engine in a closed garage or • Remote Start Aborted — Fuel Low confined area.
Page 31
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 29 • For security, power window operation is disabled To Exit Remote Start Mode Without Driving The when the vehicle is in the Remote Start mode. Vehicle Press and release the REMOTE START button one time or •...
30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE DOOR LOCKS WARNING! Manual Door Locks • For personal security and safety in the event of an To lock each door, push the door lock knob on each door accident, lock the vehicle doors as you drive as trim panel downward.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 31 CAUTION! An unlocked vehicle is an invitation to thieves. Always remove the key from the ignition and lock all of the doors when leaving the vehicle unattended. Power Door Locks A door lock switch is located on the driver and passenger door panel.
32 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Auto Unlock On Exit Auto Unlock On Exit Programming The doors will unlock automatically on vehicles with The Automatic Unlock Doors On Exit feature can be power door locks if: enabled or disabled as follows: •...
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 33 4. A single chime will indicate the completion of the programming. 5. Repeat these steps if you want to return this feature to its previous setting. NOTE: Use the Automatic Unlock Doors On Exit feature in accordance with local laws.
34 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The Child-Protection Door Locks are located inside the WARNING! rear edge of the door. Insert the tip of the ignition key or similar flat-bladed object into the lock and rotate approxi- Avoid trapping anyone in a vehicle in a collision. mately one-quarter turn to the lock or unlock position (as Remember that the rear doors can only be opened indicated by the stamped icons).
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 35 WARNING! Never leave children in a vehicle, with the keys in the ignition switch. Occupants, particularly unat- tended children, can become entrapped by the win- dows while operating the power window switches. Such entrapment may result in serious injury or death.
36 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To cancel the Auto-Down movement, operate the switch Auto Window Up — If Equipped either in the up or down direction and release the switch. Lift the window switch fully upward to the second detent, release, and the window will go up automatically.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 37 WARNING! When the window is almost closed, there is no anti-pinch protection. To avoid personal injury, be sure to clear your arms, hands, fingers and all objects from the window path before closing. Reset Auto Up Anytime the vehicle battery goes dead, the Auto Up function will be disabled.
38 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE open or partially open positions. This is a normal occur- To unlatch the trunk lid from outside the vehicle, press rence and can be minimized. If the buffeting occurs with and release the TRUNK button on the RKE transmitter the rear windows open, then open the front and rear two times.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 39 TRUNK SAFETY WARNING WARNING! Do not allow children to have access to the trunk, either by climbing into the trunk from outside, or through the inside of the vehicle. Always close the trunk lid when your vehicle is unattended.
Page 42
40 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Advanced Front Air Bags for driver and front passen- • All seat belt systems (except the driver’s) include Automatic Locking Retractors (ALRs), which lock the seat belt webbing into position by extending the belt •...
Page 43
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 41 NOTE: The Advanced Front Air Bags have a multistage secured in the rear seat in child restraints or belt- inflator design. This allows the air bag to have different positioning booster seats. Older children who do not use rates of inflation based on the severity and type of child restraints or belt-positioning booster seats should collision.
Page 44
42 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 4. Do not lean against the door or window. If your WARNING! (Continued) vehicle has side air bags, and deployment occurs, the • Being too close to the steering wheel or instrument side air bags will inflate forcefully into the space panel during Advanced Front Air Bag deployment between you and the door.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 43 Buckle up even though you are an excellent driver, even conditions. However, in an accident the belt will lock and on short trips. Someone on the road may be a poor driver reduce your risk of striking the inside of the vehicle or and cause an accident that includes you.
Page 46
44 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2. The seat belt latch plate is above the back of the front WARNING! (Continued) seat, next to your arm. Grasp the latch plate and pull out • Wearing your belt in the wrong place could make the belt.
Page 47
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 45 WARNING! • A belt that is buckled into the wrong buckle will not protect you properly. The lap portion could ride too high on your body, possibly causing internal injuries. Always buckle your belt into the buckle nearest you.
Page 48
46 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 4. Position the lap belt across your thighs, below your WARNING! abdomen. To remove slack in the lap belt portion, pull up • A belt that is worn under your arm is dangerous. on the shoulder belt.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 47 6. To release the belt, push the red button on the buckle. WARNING! The belt will automatically retract to its stowed position. • A lap belt worn too high can increase the risk of If necessary, slide the latch plate down the webbing to allow the belt to retract fully.
48 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 1. Position the latch plate as close as possible to the anchor point. 2. At about 6 to 12 in (15 to 30 cm) above the latch plate, grasp and twist the belt webbing 180 degrees to create a fold that begins immediately above the latch plate.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 49 • ALR — Automatic Locking Retractor Rear Seat Belts The shoulder belt anchorages of the rear three-point belts If the passenger seating position is equipped with an are nonadjustable for outboard and center rear passen- ALR and is being used for normal usage: gers on sedans.
50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE anytime a child safety seat is installed in a seating WARNING! position that has a belt with this feature. Children • The belt and retractor assembly must be replaced 12 years old and under should always be properly restrained in the rear seat.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 51 Seat Belt Pretensioners Supplemental Active Head Restraints (AHR) — The seat belts for both front seating positions are If Equipped equipped with pretensioning devices that are designed to These head restraints are passive, deployable compo- remove slack from the seat belt in the event of an nents, and vehicles with this equipment cannot be readily accident.
Page 54
52 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE When AHRs deploy during a rear impact, the front half of the head restraint extends forward to minimize the gap between the back of the occupant’s head and the AHR. This system is designed to help prevent or reduce the extent of injuries to the driver and front passenger in certain types of rear impacts.
Page 55
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 53 1. Grasp the deployed AHR from the rear seat. CAUTION! All occupants, including the driver, should not oper- ate a vehicle or sit in a vehicle’s seat until the head restraints are placed in their proper positions in order to minimize the risk of neck injury in the event of an accident.
Page 56
54 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3. Pull down then rearward towards the rear of the vehicle then down to engage the locking mechanism. 3 — Final Downward Movement To Engage Locking Mechanism 4. The AHR front soft foam and trim half should lock 1 —...
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 55 Enhanced Seat Belt Use Reminder System (BeltAlert ) BeltAlert is a feature intended to remind the driver to fasten their seat belt. This feature is active whenever the ignition is on. If the driver is unbelted, the Seat Belt Reminder Light will turn on and remain on until the driver seat belt is fastened.
BeltAlert Programming least three times within 10 seconds, ending with the seat belt buckled. NOTE: Chrysler Group LLC does not recommend de- activating the BeltAlert . NOTE: Watch for the Seat Belt Reminder Light to turn on while unbuckling and off while re-buckling the seat BeltAlert can be enabled or disabled by your authorized belt.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 57 NOTE: Although BeltAlert has been deactivated, the extender should be used only if the existing belt is not Seat Belt Reminder Light will continue to illuminate long enough. When it is not required, remove the ex- while the driver’s seat belt remains unbuckled.
Page 60
58 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE instrument panel, above the glove compartment. The The Advanced Front Air Bags have a multistage inflator words SRS AIRBAG are embossed on the air bag covers. design. This allows the air bag to have different rates of inflation that are based on the severity and type of collision.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 59 • Air Bag Warning Light vehicle is equipped with SABIC, they are located above the side windows. The trim covering the side air bags is • Steering Wheel and Column labeled SRS AIRBAG. •...
60 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Advanced Front Air Bag Features WARNING! The Advanced Front Air Bag system has multistage • No objects should be placed over or near the air bag driver and front passenger air bags. This system provides output appropriate to the severity and type of collision as on the instrument panel, because any such objects determined by the Occupant Restraint Controller (ORC),...
Page 63
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 61 Supplemental Seat-Mounted Side Air Bags (SAB) When the air bag deploys, it opens the seam between the Supplemental Seat-Mounted Side Air Bags may provide front and side of the seat’s trim cover. Each air bag enhanced protection to help protect an occupant during a deploys independently;...
Page 64
62 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Supplemental Side Air Bag Inflatable Curtain (SABIC) SABIC air bags may offer side-impact protection to front and rear seat outboard occupants in addition to that provided by the body structure. Each air bag features inflated chambers placed adjacent to the head of each outboard occupant that reduce the potential for side- impact head injuries.
Page 65
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 63 The system includes side impact sensors that are cali- WARNING! (Continued) brated to deploy the side air bags during impacts that • If your vehicle is equipped with SABIC air bags, require air bag occupant protection. do not have any accessory items installed which will alter the roof, including adding a sunroof to WARNING!
64 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Along with seat belts and pretensioners, Advanced Front Advanced Front Air Bags are designed to provide addi- Air Bags work with the knee bolsters to provide im- tional protection by supplementing the seat belts in proved protection for the driver and front passenger.
Page 67
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 65 Because air bag sensors measure vehicle deceleration Also, the ORC turns on the Air Bag Warning over time, vehicle speed and damage by themselves are Light in the instrument panel for approxi- not good indicators of whether or not an air bag should mately four to eight seconds for a self-check have deployed.
Page 68
66 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE are possible, based on the collision type and severity. The WARNING! steering wheel hub trim cover and the upper right side of the instrument panel separate and fold out of the way as Ignoring the Air Bag Warning Light in your instru- the air bags inflate to their full size.
Page 69
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 67 Based on the severity and type of collision, the side air A quantity of non-toxic gas is generated to inflate the side bag inflator on the crash side of the vehicle may be curtain air bag.
Page 70
68 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Enhanced Accident Response System NOTE: Front and/or side air bags will not deploy in all In the event of an impact causing air bag deployment, if collisions. This does not mean something is wrong with the communication network remains intact, and the the air bag system.
Page 71
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 69 bag inflation. These airborne particles may irritate the Maintaining Your Air Bag System skin, eyes, nose, or throat. If you have skin or eye WARNING! irritation, rinse the area with cool water. For nose or throat irritation, move to fresh air.
Page 72
70 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Air Bag Warning Light WARNING! (Continued) You will want to have the air bags ready to • Do not attempt to modify any part of your air bag inflate for your protection in a collision. The system.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 71 • Whether or not the driver and passenger safety belts NOTE: If the speedometer, tachometer, or any engine related gauges are not working, the Occupant Restraint were buckled/fastened; Controller (ORC) may also be disabled. The air bags may •...
72 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To read data recorded by an EDR, special equipment is WARNING! required, and access to the vehicle or the EDR is needed. In addition to the vehicle manufacturer, other parties, In a collision, an unrestrained child, even a tiny baby, such as law enforcement, that have the special equip- can become a projectile inside the vehicle.
Page 75
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 73 Infants And Small Children WARNING! • Safety experts recommend that children ride Rearward-facing child seats must never be used in rearward-facing in the vehicle until they are at least the front seat of a vehicle with a front passenger air one year old and weigh at least 20 lbs (9 kg).
Page 76
Safety collision. The child could be badly injured or Standards. Chrysler Group LLC also recommends that killed. Follow the manufacturer’s directions ex- you make sure that you can install the child restraint in actly when installing an infant or child restraint.
Page 77
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 75 • Carefully follow the instructions that come with the around, and insert the latch plate into the buckle restraint. If you install the restraint improperly, it may again. If you still can’t make the child restraint secure, not work when you need it.
Page 78
76 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Lower Anchors and Tether for CHildren (LATCH) must use the vehicle’s seat belt at the center position. If Your vehicle is equipped with the child restraint anchor- your child restraints are not LATCH-compatible, you can age system called LATCH, which stands for Lower only install the child restraints using the vehicle’s seat Anchors and Tether for CHildren.
Page 79
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 77 have tether straps, and you are urged to take advantage of all of the available attachments provided with your child restraint in any vehicle. NOTE: When using the LATCH attaching system to install a child restraint, please ensure that all seat belts not being used for occupant restraints are stowed and out of reach of children.
Page 80
78 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Installing The LATCH-Compatible Child Restraint In addition, there are tether strap anchorages System behind each rear seating position located in the We urge you to carefully follow the directions of the panel between the rear seatback and the rear manufacturer when installing your child restraint.
Page 81
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 79 of the seat cover material. Then, rotate the tether anchor- seat belt is tucked behind the child restraint and out of age cover directly behind the seat where you are placing reach. If the buckled seat belt interferes with the child the child restraint and attach the tether strap to the restraint installation, instead of tucking the seat belt anchorage, being careful to route the tether strap to...
Page 82
80 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Installing Child Restraint Tether Strap 2. Route the tether strap to provide the most direct path for the strap between the anchor and the child seat. If 1. Rotate the cover over the anchor directly behind the your vehicle is equipped with adjustable rear head seat where you are placing the child restraint.
Page 83
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 81 description under “Seat Belts In Passenger Seating Posi- WARNING! tions” section. The chart below defines the seating posi- tions with an Automatic Locking Retractor (ALR) or a An incorrectly anchored tether strap could lead to cinching latch plate.
Page 84
82 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE retracts, you will hear a ratcheting sound. This indicates insert the latch plate into the buckle again. If you still the safety belt is now in the Automatic Locking mode. can’t make the child restraint secure, try a different seating position.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 83 • If the shoulder belt contacts the face or neck, move the While cruising, brief full-throttle acceleration within the child closer to the center of the vehicle. Never allow a limits of local traffic laws contributes to a good break-in. child to put the shoulder belt under an arm or behind Wide-open throttle acceleration in low gear can be detri- their back.
84 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE SAFETY TIPS Exhaust Gas Transporting Passengers WARNING! NEVER TRANSPORT PASSENGERS IN THE CARGO AREA. Exhaust gases can injure or kill. They contain carbon monoxide (CO), which is colorless and odorless. WARNING! Breathing it can make you unconscious and can •...
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 85 If you are required to drive with the trunk/liftgate open, Safety Checks You Should Make Inside The make sure that all windows are closed and the climate Vehicle control BLOWER switch is set at high speed. DO NOT Seat Belts use the recirculation mode.
Page 88
86 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Defroster WARNING! (Continued) Check operation by selecting the defrost mode and place • Always make sure that floor mats are properly the blower control on high speed. You should be able to attached to the floor mat fasteners.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 87 lodged in the tread or sidewall. Inspect the tread for cuts WARNING! (Continued) and cracks. Inspect sidewalls for cuts, cracks and bulges. • Always make sure that objects cannot fall into the Check the wheel nuts for tightness.
Page 91
UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS Mirrors ......93 Uconnect™ Phone — If Equipped ... 97 Inside Day/Night Mirror .
Page 92
90 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Voice Command — If Equipped ... 127 Fold-Flat Passenger Seatback ... . 142 Voice Command System Operation .
Page 93
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 91 Fog Lights — If Equipped ....150 To Set A Desired Speed ....159 Daytime Running Lights —...
Page 94
92 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Power Sunroof — If Equipped ... . 167 Cigar Lighter And Ash Receiver — If Equipped ......174 Opening Sunroof —...
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 93 MIRRORS Inside Day/Night Mirror A two-point pivot system allows for horizontal and vertical mirror adjustment. Adjust the mirror to center on the view through the rear window. Headlight glare can be reduced by moving the small control under the mirror to the night position (toward the rear of the vehicle).
94 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Automatic Dimming Mirror — If Equipped This mirror automatically adjusts for headlight glare from vehicles behind you. You can turn the feature on or off by pressing the button at the base of the mirror. A light to the left of the button will illuminate to indicate when the dimming feature is activated.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 95 Power Mirrors The power mirror controls are located on the driver’s door trim panel. Mirror Directions When you are finished adjusting the mirror, turn the control to the center position to prevent accidentally moving a mirror.
96 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Adjusting Sideview Mirrors Exterior Mirrors Folding Feature All exterior mirrors are hinged and may be moved either Outside Mirror — Driver Side forward or rearward to resist damage. The hinges have Adjust the outside mirror to center on the adjacent lane of three detent positions: full forward, full rearward and traffic, with a slight overlap of the view obtained on the normal.
Bluetooth “Hands-Free Profile”, Ver- sion 0.96 or higher. See the Uconnect™ website for supported phones. For Uconnect™ customer support, visit the following websites: • www.chrysler.com/uconnect • www.dodge.com/uconnect Illuminated Vanity Mirror Uconnect™ Phone — IF EQUIPPED • www.jeep.com/uconnect Uconnect™...
Page 100
98 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Uconnect™ Phone allows you to transfer calls between WARNING! the system and your mobile phone as you enter or exit your vehicle and enables you to mute the system’s Any voice commanded system should be used only microphone for private conversation.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 99 Voice Command Button Operation Actual button location may vary with the ra- Voice commands can be used to operate the Uconnect™ dio. The individual buttons are described in the Phone and to navigate through the Uconnect™ Phone “Operation”...
Page 102
100 UNDERSTANDING THE FEATURES OF YOUR VEHICLE example, you can use the compound form voice Cancel Command command “Phonebook New Entry”, or you can break At any prompt, after the beep, you can say “Cancel” and the compound form command into two voice com- you will be returned to the main menu.
Page 103
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 101 • When prompted, after the beep, say “Pair a Device” phone to use if multiple mobile phones are in the and follow the audible prompts. vehicle at the same time. For example, if priority three and priority five phones are present in the vehicle, the •...
Page 104
102 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The Uconnect™ Phone will confirm the phone number • The Uconnect™ system will confirm the name and and then dial. The number will appear in the display then dial the corresponding phone number, which of certain radios.
Page 105
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 103 • When prompted, enter the number designation (e.g., Phonebook Download – Automatic Phonebook “Home”, “Work”, “Mobile”, or “Other”). This will Transfer From Mobile Phone allow you to store multiple numbers for each phone- If equipped and specifically supported by your phone, book entry, if desired.
Page 106
104 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Depending on the maximum number of entries down- Edit Uconnect™ Phonebook Entries loaded, there may be a short delay before the latest NOTE: downloaded names can be used. Until then, if avail- •...
Page 107
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 105 • After you enter the Phonebook Delete menu, you will After you are finished editing an entry in the phonebook, you will be given the opportunity to edit another entry in then be asked for the name of the entry that you wish the phonebook, call the number you just edited, or return to delete.
Page 108
106 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Delete/Erase “All” Uconnect™ Phonebook Entries List All Names In The Uconnect™ Phonebook • Press the • Press the button to begin. button to begin. • After the “Ready” prompt and the following beep, say •...
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 107 Phone Call Features Answer Or Reject An Incoming Call — The following features can be accessed through the Call Currently In Progress Uconnect™ Phone if the feature(s) are available on your If a call is currently in progress and you have another mobile service plan.
Page 110
108 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Making A Second Call While Current Call Is In Toggling Between Calls Progress If two calls are in progress (one active and one on hold), To make a second call while you are currently on a call, press the button until you hear a single beep, indicat- press the...
Page 111
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 109 Call Termination Call Continuation To end a call in progress, momentarily press the Call continuation is the progression of a phone call on the Uconnect™ Phone after the vehicle ignition key has been button.
110 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Uconnect™ Phone Features Emergency Assistance If you are in an emergency and the mobile phone is Language Selection reachable: To change the language that the Uconnect™ Phone is • Pick up the phone and manually dial the emergency using: number for your area.
Page 113
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 111 Canada and 060 for Mexico). The number dialed may Towing Assistance not be applicable with the available mobile service and If you need towing assistance: area. • Press the button to begin. • If supported, this number may be programmable on •...
Page 114
112 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Paging When calling a number with your Uconnect™ Phone that To learn how to page, refer to “Working with Automated normally requires you to enter in a touch-tone sequence Systems”. Paging works properly except for pagers of on your mobile phone keypad, you can press the certain companies, which time out a little too soon to button and say the sequence you wish to enter, followed...
Page 115
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 113 The Uconnect™ Phone will then send the corresponding Turning Confirmation Prompts ON/OFF phone number associated with the phonebook entry, as Turning confirmation prompts off will stop the system tones over the phone. from confirming your choices (e.g., the Uconnect™ Phone will not repeat a phone number before you dial it).
114 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Dialing Using The Mobile Phone Keypad Mute/Un-Mute (Mute OFF) You can dial a phone number with your mobile phone When you mute the Uconnect™ Phone, you will still be keypad and still use the Uconnect™ Phone (while dialing able to hear the conversation coming from the other via the mobile phone keypad, the user must exercise party, but the other party will not be able to hear you.
Page 117
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 115 • When prompted, say “List Phones”. from your Uconnect™ Phone paired mobile phone to the Uconnect™ Phone or vice versa, press the button • The Uconnect™ Phone will play the phone names of and say “Transfer Call”.
116 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The selected phone will be used for the next phone Things You Should Know About Your Uconnect™ call. If the selected phone is not available, the Phone Uconnect™ Phone will return to using the highest Uconnect™...
Page 119
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 117 You can either press the Uconnect™ Phone button to Voice Command restore the factory setting or repeat the words and • For best performance, adjust the rearview mirror to phrases when prompted by the Uconnect™ Phone. For provide at least ⁄...
Page 120
118 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • fully closed windows, • Numbers must be spoken in single digits. “800” must be spoken “eight-zero-zero” not “eight hundred”. • dry weather condition. • You can say “O” (letter “O”) for “0” (zero). •...
Page 121
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 119 • fully closed windows, Uconnect™ Phone can read or send new messages on • dry weather conditions, and your phone. • operation from the driver’s seat. Read Messages: • Performance, such as audio clarity, echo, and loudness If you receive a new text message while your phone is to a large degree rely on the phone and network, and connected to Uconnect™...
Page 122
120 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Send Messages: 3. Where are you? You can send messages using Uconnect™ Phone. To send 4. I need more direction. a new message: 5. L O L • Press the button. 6. Why •...
Page 123
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 121 16. Can this wait? Bluetooth Communication Link Mobile phones have been found to lose connection to the 17. Bye for now Uconnect™ Phone. When this happens, the connection 18. When can we meet can generally be reestablished by switching the phone off/on.
Page 124
122 UNDERSTANDING THE FEATURES OF YOUR VEHICLE...
Page 125
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 123...
Page 126
124 UNDERSTANDING THE FEATURES OF YOUR VEHICLE...
Page 127
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 125 Voice Commands Voice Commands Primary Alternate(s) Primary Alternate(s) zero call cancel confirmation prompts three continue four delete five dial download seven edit eight emergency nine English star (*) erase all plus (+) Espanol pound (#) Francais add location...
Page 128
126 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Voice Commands Voice Commands Primary Alternate(s) Primary Alternate(s) language return to main menu return or main menu list names select phone select list phones send mobile set up phone settings or phone set up mute towing assistance mute off...
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 127 General Information NOTE: Take care to speak into the Voice Interface This device complies with Part 15 of the FCC rules and System as calmly and normally as possible. The ability of RSS 210 of Industry Canada. Operation is subject to the the Voice Interface System to recognize user voice com- following conditions: mands may be negatively affected by rapid speaking or a...
128 UNDERSTANDING THE FEATURES OF YOUR VEHICLE If you ever wish to interrupt the system while it lists The system will best recognize your speech if the win- options, press the Voice Command button, listen dows are closed, and the heater/air conditioning fan is set to low.
Page 131
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 129 2. Say a command (e.g., “Help”). Radio AM To switch to the AM band, say “AM” or “Radio AM”. In 3. Use the ON/OFF VOLUME rotary knob to adjust the this mode, you may say the following commands: volume to a comfortable level while the Voice Command •...
Page 132
130 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • “Menu Radio” (to switch to the radio menu) Disc To switch to the disc mode, say “Disc”. In this mode, you • “Main Menu” (to switch to the main menu) may say the following commands: Satellite Radio •...
Page 133
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 131 • “Switch to system setup” − “Continue” (to continue recording) • “Change to setup” − “Delete” (to delete the recording) • “Play Memos” (to play previously recorded memos) • “Main menu setup” or —...
132 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Voice Training WARNING! For users experiencing difficulty with the system recog- • It is dangerous to ride in a cargo area, inside or nizing their voice commands or numbers the Uconnect™ Voice “Voice Training” feature may be used. outside of a vehicle.
Page 135
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 133 Adjusting The Seat Up Or Down The height of the seats can be adjusted up or down. Pull upward or push downward on the rear of the seat switch, the seat will move in the direction of the switch. Release the switch when the desired position is reached.
134 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! CAUTION! • Adjusting a seat while driving may be dangerous. Do not place any article under a power seat or Moving a seat while driving could result in loss of impede its ability to move as it may cause damage to control which could cause a collision and serious the seat controls.
Page 137
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 135 Press the switch once to select HIGH-level WARNING! heating. Press the switch a second time to select • Persons who are unable to feel pain to the skin LOW-level heating. Press the switch a third time to shut the heating elements OFF.
136 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Manual Front Seat Adjustment Pull the bar upward to move the seat forward or rear- The manual seat adjustment bar is at the front of the seat, ward. Release the bar once the seat is in the position near the floor.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 137 Manual Seat Height Adjustment Lever Seatback Adjustment Reclining Seats The recliner control is located on the side of the seat. To recline, lean forward slightly before lifting the lever, then lean back to the desired position and release the lever. Lean forward and lift the lever to return the seatback to its normal position.
138 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! • Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be properly adjusted and you could be injured. Adjust the seat only while the vehicle is parked.
Page 141
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 139 identified by any markings, only through visual inspec- WARNING! tion of the head restraint. The head restraint will be split in two halves, with the front half being soft foam and The head restraints for all occupants must be prop- trim, the back half being decorative plastic.
Page 142
140 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To raise the head restraint, pull upward on the head For comfort the Active Head Restraints can be tilted restraint. To lower the head restraint, press the push forward and rearward. To tilt the head restraint closer to button, located at the base of the head restraint, and push the back of your head, pull forward on the bottom of the downward on the head restraint.
Page 143
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 141 • In the event of deployment of an Active Head Re- straint, refer to “Occupant Restraints/Resetting Active Head Restraints (AHR)” in “Things to Know Before Starting Your Vehicle” for further information. WARNING! • Do not place items over the top of the Active Head Restraint, such as coats, seat covers or portable DVD players.
142 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Fold-Flat Passenger Seatback WARNING! (Continued) The recline handle on the front passenger seat also • Active Head Restraints may be deployed if they releases the seatback to fold forward. are struck by an object such as a hand, foot or loose cargo.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 143 The hard seatback features a work surface and a molded When returning the rear seatback to the upright position, rim for retaining items stored on the seatback panel. be sure the seatback is latched. Fold-Flat Front Passenger Seat Folding Rear Seats Folding Rear Seat...
144 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! The rear cargo area of the vehicle (with the rear seatbacks in the locked-up or folded down position) should not be used as a play area by children. They could be seriously injured in a collision. Children should be seated and using the proper restraint system.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 145 TO OPEN AND CLOSE THE HOOD 2. Then lift the secondary latch located under the front To open the hood, two latches must be released. edge of the hood, near the center and raise the hood. 1.
146 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Use the hood prop rod to secure the hood in the open CAUTION! position. Place the upper end of the prop rod in the hole on the left underside of the hood. To prevent possible damage, do not slam the hood to close it.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 147 passing light, fog lights, instrument panel light dimming Headlights And Parking Lights and turn signals. The multifunction lever is located on Turn the end of the multifunction lever to the first detent the left side of the steering column. for parking light operation.
148 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Automatic Headlights — If Equipped With the engine running and the multifunction lever in Turning the end of the multifunction lever to the third the AUTO position, the headlights will turn on and turn detent (AUTO), will activate the automatic headlight off based on the surrounding light levels.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 149 Lane Change Assist Tap the lever up or down once, without moving beyond the detent, and the turn signal (right or left) will flash three times then automatically turn off. High/Low Beam Switch Push the multifunction lever away from you to switch the headlights to high beam.
150 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Fog Lights — If Equipped NOTE: The front fog lights will only operate with the The front fog light switch is on the multifunction headlights on low beam. Selecting high beam headlights lever. To activate the front fog lights, turn on the will turn off the front fog lights.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 151 Instrument Panel Dimmer Rotate the center portion of the lever to the extreme bottom position to fully dim the instrument panel lights and prevent the interior lights from illuminating when a door is opened. Rotate the center portion of the lever up to increase the brightness of the instrument panel lights when the park- ing lights or headlights are on.
152 UNDERSTANDING THE FEATURES OF YOUR VEHICLE will remain on until the switch is pressed a second time, There is a second light located midway back in the so be sure they have been turned off before leaving the headliner. vehicle.
Page 155
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 153 Windshield Wiper/Washer Lever Changing Wiper Speeds Rotate the end of the lever to the LO position for NOTE: The wipers will automatically return to the park low-speed wiper operation, or to the HI position for position if you turn the ignition switch OFF while they high-speed wiper operation.
154 UNDERSTANDING THE FEATURES OF YOUR VEHICLE interval. There are five delay settings, which allow you to CAUTION! regulate the wipe interval from a minimum of one cycle • Turn the windshield wipers off when driving every second to a maximum of approximately 18 seconds between cycles.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 155 NOTE: The wiper delay times depend on vehicle speed. If you activate the washer while the wiper control is in If the vehicle is moving less than 10 mph (16 km/h), the off position, the wipers will operate for two wipe delay times will be doubled.
156 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Mist Feature Headlights With Wipers Feature Push down on the wiper control lever to activate a single (Available With Automatic Headlights Only) wipe to clear the windshield of road mist or spray from When this feature is active, the headlights will turn on a passing vehicle.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 157 located below the steering wheel at the end of the outward or push it inward as desired. To lock the steering steering column. column in position, pull the lever upward until fully engaged. WARNING! Do not adjust the steering column while driving.
158 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The Electronic Speed Control buttons are located on the the same time. If this occurs, the Electronic Speed Control right side of the steering wheel. System can be reactivated by pushing the Electronic Speed Control ON/OFF button and resetting the desired vehicle set speed.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 159 To Set A Desired Speed To Vary The Speed Setting Turn the Electronic Speed Control ON. When the vehicle When the Electronic Speed Control is set, you can in- has reached the desired speed, press the SET (-) button crease speed by pushing the RES (+) button.
160 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Accelerate For Passing WARNING! Press the accelerator as you would normally. When the pedal is released, the vehicle will return to the set speed. Electronic Speed Control can be dangerous where the system cannot maintain a constant speed.
Page 163
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 161 WARNING! • Your motorized door or gate will open and close while you are training the universal transceiver. Do not train the transceiver if people, pets or other objects are in the path of the door or gate. Only use this transceiver with a garage door opener that has a “stop and reverse”...
162 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Programming HomeLink Place the handheld transmitter 1 to 3 in (3 to 8 cm) away from the HomeLink button you wish to program while Before You Begin keeping the indicator light in view. If you have not trained any of the HomeLink buttons, erase all channels before you begin training.
Page 165
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 163 • After training a HomeLink channel, if the garage This can usually be found where the hanging antenna door does not operate with HomeLink and the ga- wire is attached to the garage door opener motor. It is rage door opener was manufactured after 1995, the NOT the button normally used to open and close the garage door opener may have a rolling code.
164 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 6. Firmly press and release the LEARN or TRAINING Gate Operator/Canadian Programming button. The name and color of the button may vary by Canadian radio frequency laws require transmitter sig- manufacturer. nals to time-out (or quit) after several seconds of trans- mission –...
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 165 If you unplugged the device for training, plug it back in 2. Press and hold the desired HomeLink button until at this time. the indicator light begins to flash after 20 seconds. Do not release the button.
166 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Troubleshooting Tips General Information If you are having trouble programming HomeLink , here This device complies with FCC rules Part 15 and Industry are some of the most common solutions: Canada RSS-210. Operation is subject to the following two conditions: •...
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 167 POWER SUNROOF — IF EQUIPPED WARNING! The sunroof controls are mounted between the dome/ • Never leave children in a vehicle with the key in reading lights. the ignition switch. Occupants, particularly unat- tended children, can become entrapped by the power sunroof while operating the power sunroof switch.
168 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Opening Sunroof — Express position. The sunroof will close fully and stop automati- Press the switch rearward and release it within one-half cally. This is called “Express Close”. During Express second and the sunroof will open automatically from any Close operation, any movement of the switch will stop position.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 169 NOTE: Pinch protection is disabled while the switch is Wind Buffeting pressed. Wind buffeting can be described as the perception of pressure on the ears or a helicopter-type sound in the Venting Sunroof — Express ears.
170 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Ignition Off Operation ELECTRICAL POWER OUTLETS For vehicles not equipped with the Electronic Vehicle There are two 12 Volt (13 Amp) electrical power outlets Information Center (EVIC), the power sunroof switch on this vehicle. Both of the power outlets are protected by will remain active for 45 seconds after the ignition switch a fuse.
Page 173
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 171 Instrument Panel Power Outlet Center Console There is a power outlet located on the inside of the center NOTE: To ensure proper operation a MOPAR knob console. This power outlet is powered directly from the and element must be used.
Page 174
172 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! • Do not exceed the maximum power of 160 Watts (13 Amps) at 12 Volts. If the 160 Watt (13 Amp) power rating is exceeded the fuse protecting the system will need to be replaced. •...
Page 175
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 173 WARNING! CAUTION! • Many accessories that can be plugged in draw To avoid serious injury or death: • Only devices designed for use in this type of power from the vehicle’s battery, even when not in use (i.e., cellular phones, etc.).
174 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CIGAR LIGHTER AND ASH RECEIVER — IF EQUIPPED An optional ash receiver is available from your autho- rized dealer and will fit in the center console front cupholder. The optional ash receiver also comes with a cigar lighter that can be used with the power outlets.
Page 177
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 175 Rear Cupholders Rear Bottle Holder Rear Seat Bottle Holder WARNING! There are built-in bottle holders located in both rear door trim panels. If containers of hot liquid are placed in the bottle holder, they can spill when the door is closed, burn- ing the occupants.
176 UNDERSTANDING THE FEATURES OF YOUR VEHICLE STORAGE CONSOLE FEATURES The center console is located between the front driver Glovebox Storage Compartment and passenger seats. The center console armrest slides The glovebox storage compartment is located on the right forward from design position to provide added user side of the instrument panel.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 177 Center Console Storage Console Detail Dual Storage Bins 1 — Release Top Compartment 2 — Release Bottom Compartment The center console contains both an upper and lower storage bin. Lifting a latch at the front of the hinged The lower bin can be accessed directly, without first armrest provides access to these storage areas.
178 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The lower storage bin includes a molded-in coin holder, WARNING! room for CD’s, DVD’s, and a power outlet that allows a cellular phone to recharge while concealed. Do not operate this vehicle with a console compart- ment lid in the open position.
Page 181
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 179 WARNING! WARNING! (Continued) • To help protect against personal injury, passengers • Be certain that the seatback is securely locked into should not be seated in the rear cargo area. The position. If the seatback in not securely locked rear cargo space is intended for load carrying into position, the seat will not provide the proper purposes only, not for passengers, who should sit...
180 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Do not pile luggage or cargo higher than the top of the seatback. This could impair visibility or become a dan- gerous projectile in a sudden stop or collision. Ski Pass-Through There is a ski pass-through door located behind the rear seat armrest that allows longer items, such as snow skis, to be stored in the rear cargo area.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 181 REAR WINDOW FEATURES CAUTION! Rear Window Defroster Failure to follow these cautions can cause damage to The rear window defroster button is located on the the heating elements: climate control (Mode) knob. Press this button to •...
UNDERSTANDING YOUR INSTRUMENT PANEL CONTENTS Instrument Panel Features ....186 Oil Change Required — If Equipped ..206 Instrument Cluster ....187 Trip Functions .
Page 186
184 UNDERSTANDING YOUR INSTRUMENT PANEL Media Center 230 (REQ) — AM/FM Stereo Media Center 730N/430/430N (RHR/RER/ Radio And 6–Disc CD/DVD Changer RBZ/RHB) CD/DVD/HDD/NAV — (MP3/WMA AUX Jack) ....215 If Equipped .
Page 187
UNDERSTANDING YOUR INSTRUMENT PANEL 185 Media Center 130 With Satellite Radio Play Mode ......261 (Sales Code RES+RSC)....243 List Or Browse Mode .
188 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER DESCRIPTIONS removes this heat. You can also turn the Temperature control to maximum heat, the Mode control to Floor and 1. Temperature Gauge the Fan control to High. This allows the heater core to act The temperature gauge shows engine coolant tempera- as a supplement to the radiator and aids in removing heat ture.
Page 191
UNDERSTANDING YOUR INSTRUMENT PANEL 189 5. Low Fuel Light If jump starting is required, refer to “Jump Starting When the fuel level drops to approximately 2.0 gal- Procedures” in “What To Do In Emergencies”. lons (7.6 Liters), the fuel symbol will light and a 7.
Page 192
190 UNDERSTANDING YOUR INSTRUMENT PANEL flash or remain on continuously. Refer to “Occupant 10. Engine Temperature Warning Light Restraints” in “Things To Know Before Starting Your This light warns of an overheated engine condi- Vehicle” for further information. tion. If the engine is critically hot, a warning chime will sound 10 times.
Page 193
UNDERSTANDING YOUR INSTRUMENT PANEL 191 The light will remain on until the cause is corrected. In the event of an EBD failure, the Brake Warning Light will turn on along with the ABS Light. Immediate repair NOTE: The light may flash momentarily during sharp to the ABS system is required.
Page 194
192 UNDERSTANDING YOUR INSTRUMENT PANEL 12. Tachometer been driven. If your odometer needs to be repaired or The silver area of the scale shows the permissible engine serviced, the repair technician should leave the odometer revolutions-per-minute (RPM x 1000) for each gear range. reading the same as it was before the repair or service.
Page 195
UNDERSTANDING YOUR INSTRUMENT PANEL 193 Vehicle Odometer Messages LoW tirE When the appropriate conditions exist, the odometer will When the appropriate condition exists, the odometer display the following messages: display will toggle between LoW and tirE for three cycles. door ......Door Ajar HOTOIL dECK .
Page 196
194 UNDERSTANDING YOUR INSTRUMENT PANEL tighten the fuel filler cap properly and press the odom- To turn off the message temporarily, press and release the eter reset button to turn off the “gASCAP” message. Trip Odometer button on the instrument cluster. To reset (Refer to “Onboard Diagnostic System —...
Page 197
UNDERSTANDING YOUR INSTRUMENT PANEL 195 15. Cruise Indicator — If Equipped 17. Electronic Throttle Control (ETC) Indicator Light This indicator shows that the Electronic Speed This light informs you of a problem with the Control System is ON. Electronic Throttle Control (ETC) system. If a problem is detected, the light will come on 16.
196 UNDERSTANDING YOUR INSTRUMENT PANEL 18. Park/Headlight ON Indicator — If Equipped 22. Vehicle Security Light — If Equipped This indicator will illuminate when the park This light will flash rapidly for approximately lights or headlights are turned on. 16 seconds when the alarm system is arming. The light will begin to flash slowly indicating that the system is armed.
Page 199
UNDERSTANDING YOUR INSTRUMENT PANEL 197 If the ABS light is on, the brake system should be serviced cycles, and the vehicle has been driven several miles as soon as possible to restore the benefit of Anti-Lock (kilometers) at speeds greater than 30 mph (48 km/h), see Brakes.
Page 200
198 UNDERSTANDING YOUR INSTRUMENT PANEL 25. Tire Pressure Monitoring Telltale Light reduces fuel efficiency and tire tread life, and may affect Each tire, including the spare (if provided), the vehicle’s handling and stopping ability. should be checked monthly when cold and Please note that the TPMS is not a substitute for proper inflated to the inflation pressure recommended tire maintenance, and it is the driver’s responsibility to...
Page 201
UNDERSTANDING YOUR INSTRUMENT PANEL 199 alternate tires or wheels on the vehicle that prevent the 26. Malfunction Indicator Light (MIL) TPMS from functioning properly. Always check the The Malfunction Indicator Light (MIL) is part of TPMS malfunction telltale after replacing one or more an onboard diagnostic system called OBD that tires or wheels on your vehicle, to ensure that the monitors emissions, engine, and automatic trans-...
Page 202
200 UNDERSTANDING YOUR INSTRUMENT PANEL 27. Transmission Temperature Warning Light — CAUTION! If Equipped This light indicates that the transmission fluid Prolonged driving with the MIL on could cause temperature is running hot. This may occur damage to the engine control system. It also could with severe usage, such as trailer towing.
UNDERSTANDING YOUR INSTRUMENT PANEL 201 MINI-TRIP COMPUTER — IF EQUIPPED WARNING! The Mini-Trip Computer is located in the instrument cluster and features a driver-interactive trip information If the Transmission Temperature Warning Light is and temperature display. illuminated and you continue operating the vehicle, in some circumstances you could cause the fluid to NOTE: The system will display the last known outside boil over, come in contact with hot engine or exhaust...
202 UNDERSTANDING YOUR INSTRUMENT PANEL Control Buttons RESET Button To reset the display shown, turn the ignition switch to the ON position, then press and hold the RESET button located on the steering wheel. The following displays can be reset or changed: •...
UNDERSTANDING YOUR INSTRUMENT PANEL 203 ELECTRONIC VEHICLE INFORMATION CENTER The EVIC consists of the following: (EVIC) – IF EQUIPPED • Compass Heading Display (N, S, E, W, NE, NW, SE, The Electronic Vehicle Information Center (EVIC) fea- tures a driver-interactive display that is located in the •...
Page 206
204 UNDERSTANDING YOUR INSTRUMENT PANEL The system allows the driver to select information by Press and release the MENU button to advance pressing the following buttons on the instrument panel the display to each of the EVIC Main Menu switch bank located below the climate controls: features.
UNDERSTANDING YOUR INSTRUMENT PANEL 205 • Right Rear Turn Signal Lamp Out (with a single Press and release the SELECT Button to accept a selection. The SELECT Button also resets chime) various Trip Functions. • RKE (Remote Keyless Entry) Battery Low (with a SELECT single chime) Button...
206 UNDERSTANDING YOUR INSTRUMENT PANEL • Remote start aborted — Fuel low indicator system is duty cycle based, which means the engine oil change interval may fluctuate dependent upon • Remote start disabled — System fault your personal driving style. •...
UNDERSTANDING YOUR INSTRUMENT PANEL 207 Trip Functions The Trip Functions mode displays the following informa- Press and release the MENU button until one of the tion: following Trip Functions displays in the EVIC: • ECO (Fuel Saver Indicator) — If Equipped •...
208 UNDERSTANDING YOUR INSTRUMENT PANEL • Distance To Empty (DTE) • Elapsed Time Shows the estimated distance that can be traveled with Shows the total elapsed time of travel since the last reset. the fuel remaining in the tank. This estimated distance is Elapsed time will increment when the ignition switch is determined by a weighted average of the instantaneous in the ON or START position.
UNDERSTANDING YOUR INSTRUMENT PANEL 209 Tire PSI Compass Display Press and release the MENU button until Tire PSI is The compass heading indicates the direction highlighted in the EVIC. Press and release the SELECT the vehicle is facing. Press and release the button and one of the following will be displayed: compass button to display one of eight compass heading and the outside tempera-...
Page 212
210 UNDERSTANDING YOUR INSTRUMENT PANEL one or more 360–degree turns (in an area free from large 3. Press and release the DOWN button until “Calibrate metal or metallic objects) until the CAL indicator in the Compass Yes” displays in the EVIC. EVIC turns off.
Page 213
UNDERSTANDING YOUR INSTRUMENT PANEL 211 NOTE: Magnetic and battery powered devices, (such as 1. Turn the ignition switch to the ON position. Leave the cell phones, iPod’s, radar detectors, PDA’s and laptops) shift lever in PARK. should be kept away from the top of the instrument 2.
212 UNDERSTANDING YOUR INSTRUMENT PANEL Personal Settings Auto Unlock on Exit (Customer-Programmable Features) When ON is selected and the transaxle is in the PARK or Personal Settings allows the driver to set and recall NEUTRAL position, all doors will unlock when the features when the automatic transaxle is in PARK.
Page 215
UNDERSTANDING YOUR INSTRUMENT PANEL 213 Sound Horn with Lock Headlights With Wipers When ON is selected, a short horn sound will occur when (Available with Auto Headlights Only) the RKE transmitter LOCK button is pressed. This feature When ON is selected, and the headlight switch is in the may be selected with or without the Flash Lights with AUTO position, the headlights will turn on approxi- Lock feature.
Page 216
214 UNDERSTANDING YOUR INSTRUMENT PANEL Opening either front vehicle door will cancel this feature. Display ECO — If Equipped To make your selection, press the SELECT button until The “ECO” message is located in the EVIC, this message Off, 45 sec., 5 min., or 10 min. appears. can be turned on or off.
UNDERSTANDING YOUR INSTRUMENT PANEL 215 SETTING THE ANALOG CLOCK MEDIA CENTER 230 (REQ) — AM/FM STEREO RADIO AND 6–DISC CD/DVD CHANGER (MP3/WMA AUX JACK) NOTE: The radio sales code is located on the lower right side of the radio faceplate. To set the analog clock, located at the top center of the instrument panel, press and hold the button in until the setting is correct.
216 UNDERSTANDING YOUR INSTRUMENT PANEL Operating Instructions - Radio Mode SEEK Buttons Press and release the SEEK buttons to search for the next NOTE: The ignition switch must be in the ON or ACC listenable station in AM/FM mode. Press the right switch position to operate the radio.
Page 219
UNDERSTANDING YOUR INSTRUMENT PANEL 217 If your vehicle is not equipped with or this feature is not Clock Setting Procedure available on your vehicle, a “Not Equipped With 1. Press and hold the TIME button until the hours blink. Uconnect Phone” message will display on the radio screen.
Page 220
218 UNDERSTANDING YOUR INSTRUMENT PANEL INFO Button Push the rotary TUNE/SCROLL control knob a second Press the INFO button for an RDS station (one with call time and MID will display. Turn the TUNE/SCROLL letters displayed). The radio will return a Radio Text control knob to the right or left to increase or decrease the message broadcast from an FM station (FM mode only).
Page 221
UNDERSTANDING YOUR INSTRUMENT PANEL 219 MUSIC TYPE Button Program Type 16-Digit Character Display Pressing this button once will turn on the Music Type Information Inform mode for five seconds. Pressing the MUSIC TYPE button Jazz Jazz or turning the TUNE/SCROLL control knob within five News News seconds will allow the program format type to be se-...
Page 222
220 UNDERSTANDING YOUR INSTRUMENT PANEL • DVD Enter - When the disc is in DVD Menu mode, Program Type 16-Digit Character Display selecting DVD Enter will allow you to play the current Top 40 Top 40 highlighted selection. Use the remote control to scroll Weather Weather up and down the menu (if equipped).
Page 223
UNDERSTANDING YOUR INSTRUMENT PANEL 221 • Angle – Repeatedly pressing SELECT will change • Set Home Clock - Pressing the SELECT button allows the viewing angle if supported by the DVD disc (if you to set the clock. Turn the TUNE/SCROLL control equipped).
Page 224
222 UNDERSTANDING YOUR INSTRUMENT PANEL Audio Language — If Equipped Audio DRC — If Equipped Selecting this item allows you to choose a default audio Selecting this item allows you to limit maximum audio language (effective only if the language is supported by dynamic range.
Page 225
UNDERSTANDING YOUR INSTRUMENT PANEL 223 NOTE: The user will have to set these defaults before You may add a second station to each pushbutton by loading a disc. If changes are made to these settings after repeating the above procedure with this exception: Press a disc is loaded, changes will not be effective.
224 UNDERSTANDING YOUR INSTRUMENT PANEL Operation Instructions - (DISC MODE for CD and NOTE: The ignition switch must be in the ON or ACC MP3/WMA Audio Play, DVD-VIDEO) position to operate the radio. The radio DVD player and many DVD discs are coded by LOAD Button —...
Page 227
UNDERSTANDING YOUR INSTRUMENT PANEL 225 Eject Button — Ejecting Compact Disc(s) SCAN Button (CD MODE) Press the EJECT button and the pushbutton Press the SCAN button to scan through each track on the with the corresponding number (1-6) where the CD currently playing.
226 UNDERSTANDING YOUR INSTRUMENT PANEL Notes On Playing MP3/WMA Files The radio uses the following limits for file systems: The radio can play MP3/WMA files; however, acceptable • Maximum number of directory levels: 8 MP3/WMA file recording media and formats are limited. •...
Page 229
UNDERSTANDING YOUR INSTRUMENT PANEL 227 If a disc contains multi-formats, such as CD audio and MPEG Sampling Fre- Bit Rate (kbps) MP3/WMA tracks, the radio will only play the MP3/ Specification quency (kHz) WMA tracks on that disc. 320, 256, 224, MPEG-1 Audio 192, 160, 128, Supported MP3/WMA File Formats...
228 UNDERSTANDING YOUR INSTRUMENT PANEL Playback of MP3/WMA Files LIST Button (DISC Mode for MP3/WMA Play) When a medium containing MP3/WMA data is loaded, Pressing the LIST button will bring up a list of all folders the radio checks all files on the medium. If the medium on the disc.
Page 231
UNDERSTANDING YOUR INSTRUMENT PANEL 229 Press and hold the INFO button again for three seconds SCAN Button (Auxiliary Mode) to return to elapsed time display. No function. Operation Instructions - Auxiliary Mode EJECT Button (Auxiliary Mode) The auxiliary (AUX) jack is an audio input jack which No function.
230 UNDERSTANDING YOUR INSTRUMENT PANEL Operating Instructions — Voice Command System Macrovision (If Equipped) This product incorporates copyright protection technol- For the radio, Refer to “Voice Command” in the ogy that is protected by U.S. patents and other intellec- Uconnect™ User Manual located on the DVD for further tual property rights.
Page 233
UNDERSTANDING YOUR INSTRUMENT PANEL 231 NOTE: Sirius service is not available in Hawaii and has 2. Your Vehicle Identification Number. limited coverage in Alaska. To access the ESN/SID, refer to the following steps: System Activation ESN/SID Access Sirius Satellite Radio service is pre-activated, and you With the ignition switch in the ON/RUN or ACC posi- may begin listening immediately to the one year of audio tion and the radio on, press the SETUP button and scroll...
Page 234
232 UNDERSTANDING YOUR INSTRUMENT PANEL placed within the line of sight of the antenna will cause Operating Instructions - Uconnect™ Multimedia decreased performance. Larger luggage items such as (Satellite) Mode bikes should be placed as far rearward as possible, within NOTE: The ignition switch must be in the ON/RUN or the loading design of the rack.
Page 235
UNDERSTANDING YOUR INSTRUMENT PANEL 233 INFO Button or turning the TUNE/SCROLL control knob within five Pressing the INFO button will cycle the display informa- seconds will allow the program format type to be selected. tion between Artist, Song Title, and Composer (if avail- Toggle the MUSIC TYPE button again to select the music able).
234 UNDERSTANDING YOUR INSTRUMENT PANEL SET Button – To Set the Pushbutton Memory Buttons 1 - 6 When you are receiving a channel that you wish to These buttons tune the radio to the channels that you commit to pushbutton memory, press the SET button. commit to pushbutton memory (12 Satellite stations).
UNDERSTANDING YOUR INSTRUMENT PANEL 235 MEDIA CENTER 130 (SALES CODE RES) Operating Instructions — Radio Mode NOTE: The radio sales code is located on the lower right NOTE: The ignition switch must be in the ON or ACC side of the radio faceplate. position to operate the radio.
Page 238
236 UNDERSTANDING YOUR INSTRUMENT PANEL SEEK Buttons 4. Adjust the minutes using the right side TUNE/ Press and release the SEEK buttons to search for the next SCROLL control knob. Press the TUNE/SCROLL control listenable station in AM/FM mode. Press the right switch knob to save time change.
Page 239
UNDERSTANDING YOUR INSTRUMENT PANEL 237 Push the rotary TUNE/SCROLL control knob a second AM/FM Button time and MID will display. Turn the TUNE/SCROLL Press the buttons to select either AM or FM mode. control knob to the right or left to increase or decrease the SET/RND Button —...
238 UNDERSTANDING YOUR INSTRUMENT PANEL • This radio is capable of playing compact discs (CD), and 12 FM stations to be stored into pushbutton memory. The stations stored in SET 2 memory can be selected by recordable compact discs (CD-R), rewritable compact pressing the pushbutton twice.
Page 241
UNDERSTANDING YOUR INSTRUMENT PANEL 239 If you have ejected a disc and have not removed it within CAUTION! 10 seconds, it will be reloaded. If the CD is not removed, • This CD player will accept 4-3/4 in (12 cm) discs the radio will reinsert the CD but will not play it.
240 UNDERSTANDING YOUR INSTRUMENT PANEL RW/FF Notes on Playing MP3 Files Press and hold the FF (Fast Forward) button and the CD The radio can play MP3 files; however, acceptable MP3 player will begin to fast forward until FF is released, or file recording media and formats are limited.
Page 243
UNDERSTANDING YOUR INSTRUMENT PANEL 241 • Maximum number of files: 255 Discs created with an option such as keep disc open after writing are most likely multisession discs. The use of • Maximum number of folders. (The radio display of file multisession for CD audio or MP3 playback may result in names and folder names is limited.
Page 244
242 UNDERSTANDING YOUR INSTRUMENT PANEL Playback of MP3 Files MPEG Sampling Fre- Bit Rate (kbps) When a medium containing MP3 data is loaded, the Specification quency (kHz) radio checks all files on the medium. If the medium 320, 256, 224, contains a lot of folders or files, the radio will take more MPEG-1 Audio 192, 160, 128,...
UNDERSTANDING YOUR INSTRUMENT PANEL 243 Operation Instructions - Auxiliary Mode MEDIA CENTER 130 WITH SATELLITE RADIO The auxiliary (AUX) jack is an audio input jack, which (SALES CODE RES+RSC) allows the user to plug in a portable device, such as an NOTE: The radio sales code is located on the lower right MP3 player, or cassette player, and utilize the vehicle’s side of the radio faceplate.
244 UNDERSTANDING YOUR INSTRUMENT PANEL Operating Instructions — Radio Mode SEEK Buttons Press and release the SEEK buttons to search for the next NOTE: The ignition switch must be in the ON or ACC listenable station in AM/FM mode. Press the right switch position to operate the radio.
Page 247
UNDERSTANDING YOUR INSTRUMENT PANEL 245 Phone Button Uconnect™ Phone — If Equipped 3. After adjusting the hours, press the right side TUNE/ Press this button to operate the Uconnect™ Phone feature SCROLL control knob to set the minutes. The minutes (if equipped).
Page 248
246 UNDERSTANDING YOUR INSTRUMENT PANEL INFO Button Push the rotary TUNE/SCROLL control knob a second Press the INFO button for an RDS station (one with call time and MID will display. Turn the TUNE/SCROLL letters displayed). The radio will return a Radio Text control knob to the right or left to increase or decrease the message broadcast from an FM station (FM mode only).
Page 249
UNDERSTANDING YOUR INSTRUMENT PANEL 247 MUSIC TYPE Button Program Type 16-Digit Character Display Pressing this button once will turn on the Music Type Information Inform mode for five seconds. Pressing the MUSIC TYPE button Jazz Jazz or turning the TUNE/SCROLL control knob within five News News seconds will allow the program format type to be se-...
Page 250
248 UNDERSTANDING YOUR INSTRUMENT PANEL hours, press the TUNE/SCROLL control knob to set Program Type 16-Digit Character Display the minutes. The minutes will begin to blink. Adjust Top 40 Top 40 the minutes using the right side TUNE/SCROLL Weather Weather control knob.
UNDERSTANDING YOUR INSTRUMENT PANEL 249 You may add a second station to each pushbutton by Operation Instructions — repeating the above procedure with this exception: Press CD MODE for CD and MP3 Audio Play the SET/RND button twice and SET 2 will show in the NOTE: display window.
Page 252
250 UNDERSTANDING YOUR INSTRUMENT PANEL If you insert a disc with the ignition ON and the radio EJECT Button - Ejecting a CD ON, the unit will switch from radio to CD mode and Press the EJECT button to eject the CD. begin to play when you insert the disc.
UNDERSTANDING YOUR INSTRUMENT PANEL 251 the current selection. Pressing and holding the SEEK SET/RND Button (Random Play Button) button will allow faster scrolling through the tracks in Press this button while the CD is playing to activate CD and MP3 modes. Random Play.
Page 254
252 UNDERSTANDING YOUR INSTRUMENT PANEL • Maximum number of characters in file/folder names: Supported Medium Formats (File Systems) The medium formats supported by the radio are ISO 9660 • Level 1: 12 (including a separator . and a three- Level 1 and Level 2 and includes the Joliet extension. character extension) When reading discs recorded using formats other than •...
Page 255
UNDERSTANDING YOUR INSTRUMENT PANEL 253 When using the MP3 encoder to compress audio data to Playlist files are not supported. MP3 Pro files are not an MP3 file, the bit rate and sampling frequencies in the supported. following table are supported. In addition, variable bit Playback of MP3 Files rates (VBR) are also supported.
254 UNDERSTANDING YOUR INSTRUMENT PANEL To increase the speed of disc loading, it is recommended Press the INFO button once more to return to elapsed to use CD-R media and single-session discs. To create a time priority mode. single-session disc, enable the “Disc at Once” option Press and hold the INFO button for three seconds or before writing to the disc.
UNDERSTANDING YOUR INSTRUMENT PANEL 255 is not loud enough, turn the device’s volume up. If the System Activation AUX audio sounds distorted, turn the device’s volume Sirius Satellite Radio service is pre-activated, and you down. may begin listening immediately to the one year of audio service that is included with the factory-installed satellite TIME Button (Auxiliary Mode) radio system in your vehicle.
Page 258
256 UNDERSTANDING YOUR INSTRUMENT PANEL To access the ESN/SID, refer to the following steps: bikes should be placed as far rearward as possible, within the loading design of the rack. Do not place items directly ESN/SID Access on or above the antenna. With the ignition switch in the ON/RUN or ACC posi- tion and the radio on, press the SETUP button and scroll Reception Quality...
Page 259
UNDERSTANDING YOUR INSTRUMENT PANEL 257 Operating Instructions - Uconnect™ Multimedia INFO Button (Satellite) Mode Pressing the INFO button will cycle the display informa- tion between Artist, Song Title, and Composer (if avail- NOTE: The ignition switch must be in the ON/RUN or able).
Page 260
258 UNDERSTANDING YOUR INSTRUMENT PANEL MUSIC TYPE Button SETUP Button Pressing this button once will turn on the Music Type Pressing the SETUP button allows you to select the mode for five seconds. Pressing the MUSIC TYPE button following items: or turning the TUNE/SCROLL control knob within five •...
UNDERSTANDING YOUR INSTRUMENT PANEL 259 You may add a second channel to each pushbutton by iPod /USB/MP3 CONTROL — IF EQUIPPED repeating the above procedure with this exception: Press NOTE: This section is for sales code RES and REQ/ the SET button twice and SET 2 will show in the display REL/RET radios only with Uconnect™.
260 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: • If the radio has a USB port, refer to the appropriate Uconnect™ Multimedia radio User’s Manual for iPod or external USB device support capability. • Connecting an iPod or consumer electronic audio device to the AUX port located in the radio faceplate, plays media, but does not use the iPod /MP3 control feature to control the connected device.
UNDERSTANDING YOUR INSTRUMENT PANEL 261 NOTE: If the audio device battery is completely dis- Controlling The iPod Or External USB Device charged, it may not communicate with the iPod /USB/ Using Radio Buttons MP3 control system until a minimum charge is attained. To get into the iPod /USB/MP3 control mode and access Leaving the audio device connected to the iPod /USB/ a connected audio device, either press the “AUX”...
Page 264
262 UNDERSTANDING YOUR INSTRUMENT PANEL • Turning it counterclockwise (backward) by one • While a track is playing, press the INFO button to see click, will jump to the previous track in the list or the associated metadata (artist, track title, album, etc.) press the VR button and say Previous Track for that track.
UNDERSTANDING YOUR INSTRUMENT PANEL 263 • RND button (available on sales code RES radio only): press the TUNE control knob to select and start Pressing this button toggles between Shuffle ON and playing the track. Turning the TUNE control knob Shuffle OFF modes for the iPod or external USB fast will scroll through the list faster.
Page 266
264 UNDERSTANDING YOUR INSTRUMENT PANEL • Preset 5 – Audiobooks • MUSIC TYPE button: The MUSIC TYPE button is another shortcut button to the genre listing on your • Preset 6 – Podcasts audio device. • Pressing a PRESET button will display the current CAUTION! list on the top line and the first item in that list on the second line.
UNDERSTANDING YOUR INSTRUMENT PANEL 265 system. Seven devices can be paired to the Uconnect™ WARNING! phone system, but just one can be selected and played. Do not plug in or remove the iPod or external USB Selecting Different Audio Device device while driving.
266 UNDERSTANDING YOUR INSTRUMENT PANEL Browse The remote sound system controls are located on the rear Browsing is not available on a BTSA device. Only the surface of the steering wheel, at the three and nine current song that is playing will display info. o’clock positions.
UNDERSTANDING YOUR INSTRUMENT PANEL 267 Radio Operation CD/DVD DISC MAINTENANCE Pressing the top of the switch will SEEK up for the next To keep a CD/DVD in good condition, take the following listenable station, and pressing the bottom of the switch precautions: will SEEK down for the next listenable station.
268 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: If you experience difficulty in playing a particu- Manual Heating And Air Conditioning lar disc, it may be damaged (i.e., scratched, reflective coating removed, a hair, moisture or dew on the disc) oversized, or have protection encoding. Try a known good disc before considering disc player service.
Page 271
UNDERSTANDING YOUR INSTRUMENT PANEL 269 Blower Control Temperature Control Rotate this control to regulate the Rotate this control to regulate the tem- amount of air forced through the ven- perature of the air inside the passenger tilation system in any mode. The compartment.
Page 272
270 UNDERSTANDING YOUR INSTRUMENT PANEL Mode Control (Air Direction) Bi-Level Rotate this control to choose from sev- Air is directed through the panel and floor outlets. eral patterns of air distribution. You can select either a primary mode as NOTE: For all settings, except full cold or full hot, there identified by the symbols on the con- is a difference in temperature between the upper and trol, or a blend of two of these modes.
Page 273
UNDERSTANDING YOUR INSTRUMENT PANEL 271 Recirculation Control Air is directed through the floor, defrost, and side Pressing the Recirculation Control button will window demist outlets. This setting works best in temporarily put the system in recirculation cold or snowy conditions that require extra heat to mode.
Page 274
272 UNDERSTANDING YOUR INSTRUMENT PANEL • The A/C will engage automatically to prevent fogging Air Conditioning Control when the recirculation button is pressed and the mode Press this button to engage the Air control is set to panel or Bi-Level. Conditioning.
UNDERSTANDING YOUR INSTRUMENT PANEL 273 Automatic Temperature Control (ATC) — Automatic Operation If Equipped The Automatic Temperature Control system automati- cally maintains the climate in the cabin of the vehicle at the comfort levels desired by the driver and passenger. Operation of the system is quite simple.
Page 276
274 UNDERSTANDING YOUR INSTRUMENT PANEL 2. Dial in the temperature you would NOTE: • The temperature setting can be adjusted at anytime like the system to maintain by rotating the Temperature Control knob. Once without affecting automatic operation. the comfort level is selected, the sys- •...
Page 277
UNDERSTANDING YOUR INSTRUMENT PANEL 275 • While operating in AUTO, the system will not auto- Manual Operation matically sense the presence of fog, mist or ice on the This system offers a full complement of manual override windshield. The defrost mode must be manually se- features, which consist of Blower Preferred Automatic, lected to clear the windshield and side glass.
Page 278
276 UNDERSTANDING YOUR INSTRUMENT PANEL...
Page 279
UNDERSTANDING YOUR INSTRUMENT PANEL 277 • Floor The operator can override the AUTO mode setting to change airflow distribution by rotating the Mode Control Air is directed through the floor outlets with a knob (on the right) to one of the following positions. small amount flowing through the defrost and side window demist outlets.
Page 280
278 UNDERSTANDING YOUR INSTRUMENT PANEL • Air Conditioner Control NOTE: • When the ignition switch is turned to the LOCK Press this button to turn on the air conditioning during manual operation position, the recirculation feature will be cancelled. only. When the air conditioning is •...
UNDERSTANDING YOUR INSTRUMENT PANEL 279 • Most of the time, when in Automatic Operation, you Summer Operation can temporarily put the system into Recirculation The engine cooling system in air-conditioned vehicles Mode by pressing the Recirculation button. However, must be protected with a high-quality antifreeze coolant under certain conditions, while in Automatic Mode, to provide proper corrosion protection and to protect the system is blowing air out the defrost vents.
Page 282
280 UNDERSTANDING YOUR INSTRUMENT PANEL Window Fogging Outside Air Intake Interior fogging on the windshield can be quickly re- Make sure the air intake, located directly in front of the moved by turning the mode selector to Defrost. The Mix windshield, is free of obstructions such as leaves.
Page 283
UNDERSTANDING YOUR INSTRUMENT PANEL 281 Control Setting Suggestions for Various Weather Conditions...
288 STARTING AND OPERATING STARTING PROCEDURES Automatic Transmission Before starting your vehicle, adjust your seat, adjust the The shift lever must be in the PARK or NEUTRAL inside and outside mirrors, fasten your seat belt, and if position before you can start the engine. Apply the brakes present, instruct all other occupants to buckle their seat before shifting to any driving gear.
STARTING AND OPERATING 289 For vehicles equipped with Tip Start (Six-Speed Trans- If Engine Fails To Start mission), turn the ignition switch to the START position WARNING! and release it as soon as the starter engages. The starter motor will continue to run, and it will disengage auto- •...
Page 292
290 STARTING AND OPERATING Without Tip Start If the engine shows no sign of starting after two 15- If the engine fails to start after you have followed the second periods of cranking with the accelerator pedal “Normal Starting” or “Extreme Cold Weather” proce- held to the floor, repeat the “Normal Starting”...
STARTING AND OPERATING 291 The engine block heater cord is bundled under the hood CAUTION! between the headlight assembly and the Totally Inte- grated Power Module (Fuse Box) on the driver’s side of To prevent damage to the starter, wait 10 to 15 sec- the vehicle.
292 STARTING AND OPERATING AUTOMATIC TRANSMISSION NOTE: You MUST press and hold the brake pedal down while shifting the shift lever out of PARK. CAUTION! WARNING! Damage to the transmission may occur if the follow- • It is dangerous to move the shift lever out of PARK ing precautions are not observed: •...
STARTING AND OPERATING 293 Automatic Transmission Ignition Interlock WARNING! (Continued) Systems • Unintended movement of a vehicle could injure These systems prevent the key fob from being removed those in and near the vehicle. As with all vehicles, unless the shift lever is in PARK. They also prevent you should never exit a vehicle while the engine is shifting out of PARK unless the ignition switch is in the running.
294 STARTING AND OPERATING Brake/Transmission Interlock System This vehicle is equipped with a Brake Transmission Shift Interlock System (BTSI) that holds the shift lever in the PARK position when the ignition switch is in the LOCK position. To move the shift lever out of the PARK position, the ignition switch must be turned to the ON or START position (engine running or not) and the brake pedal must be pressed.
Page 297
STARTING AND OPERATING 295 When parking on a flat surface, place the shift lever into WARNING! (Continued) the PARK position first, and then apply the parking • Never leave children alone in a vehicle. Leaving brake. unattended children in a vehicle is dangerous for a When parking on a hill, it is important to set the parking number of reasons.
Page 298
296 STARTING AND OPERATING NEUTRAL example: When operating the vehicle under heavy load- This range is used when vehicle is standing for pro- ing conditions, (i.e., in hilly terrain, traveling into strong longed periods with engine running. Engine may be headwinds, or while towing heavy trailers).
Page 299
STARTING AND OPERATING 297 DRIVE 3 — Four-Speed Transmission CAUTION! This range eliminates shifts into fourth gear. The trans- mission will operate normally in first and second gear. If the transmission operating temperature exceeds Shifts into third gear may be delayed to provide second acceptable limits, the vehicle computer may override gear operation at higher speeds.
298 STARTING AND OPERATING In the event of a momentary problem, the transmission AUTOSTICK — IF EQUIPPED can be reset to regain all forward gears by performing the AutoStick is a driver-interactive feature providing following steps: manual shift control, giving you more control of the vehicle.
STARTING AND OPERATING 299 • Avoid using speed control when AutoStick is en- NOTE: In AutoStick mode, the transmission will only shift up or down when the driver moves the shift lever to gaged. the right (+) or left (-). •...
300 STARTING AND OPERATING DRIVING ON SLIPPERY SURFACES Traction When driving on wet or slushy roads, it is possible for a Acceleration wedge of water to build up between the tire and road Rapid acceleration on snow covered, wet, or other slip- surface.
STARTING AND OPERATING 301 DRIVING THROUGH WATER Shallow Standing Water Driving through water more than a few inches/ Although your vehicle is capable of driving through centimeters deep will require extra caution to ensure shallow standing water, consider the following Caution safety and prevent damage to your vehicle.
Page 304
302 STARTING AND OPERATING CAUTION! (Continued) WARNING! • Driving through standing water may cause dam- • Driving through standing water limits your vehi- age to your vehicle’s drivetrain components. Al- cle’s traction capabilities. Do not exceed 5 mph ways inspect your vehicle’s fluids (i.e., engine oil, (8 km/h) when driving through standing water.
STARTING AND OPERATING 303 POWER STEERING system. This noise should be considered normal, and it The standard power steering system will give you good does not in any way damage the steering system. vehicle response and increased ease of maneuverability WARNING! in tight spaces.
304 STARTING AND OPERATING Power Steering Fluid Check WARNING! Checking the power steering fluid level at a defined service interval is not required. The fluid should only be Fluid level should be checked on a level surface and checked if a leak is suspected, abnormal noises are with the engine off to prevent injury from moving apparent, and/or the system is not functioning as antici- parts and to ensure accurate fluid level reading.
Page 307
STARTING AND OPERATING 305 The parking brake lever is located in the center console. When the parking brake is applied with the ignition To apply the parking brake, pull the lever up as firmly as switch ON, the “Brake Warning Light” in the instrument possible.
Page 308
306 STARTING AND OPERATING make it difficult to move the shift lever out of PARK. The WARNING! (Continued) parking brake should always be applied whenever the • Be sure the parking brake is fully disengaged driver is not in the vehicle. before driving;...
STARTING AND OPERATING 307 ANTI-LOCK BRAKE SYSTEM (ABS) WARNING! (Continued) The Anti-Lock Brake System (ABS) provides increased • The ABS cannot prevent collisions, including vehicle stability and brake performance under most those resulting from excessive speed in turns, braking conditions. The system operates with a separate following another vehicle too closely, or hydro- computer to modulate the hydraulic pressure to prevent planing.
Page 310
308 STARTING AND OPERATING service is required. However, the conventional brake properly. This self check occurs each time the vehicle is system will continue to operate normally if the “Brake started and accelerated past 7 mph (11 km/h). Warning Light” is not on. ABS is activated during braking under certain road or If the “Anti-Lock Brake Warning Light”...
STARTING AND OPERATING 309 together to enhance vehicle stability and control in vari- WARNING! ous driving conditions and are commonly referred to as ESC. The Anti-Lock Brake System contains sophisticated electronic equipment that may be susceptible to Anti-Lock Brake System (ABS) interference caused by improperly installed or high This system aids the driver in maintaining vehicle control output radio transmitting equipment.
310 STARTING AND OPERATING spinning faster than the other, the system will apply the reduce brake pedal pressure unless braking is no longer brake of the spinning wheel. This will allow more engine desired. Once the brake pedal is released, the BAS is torque to be applied to the wheel that is not spinning.
STARTING AND OPERATING 311 Hill Start Assist (HSA) – If Equipped HSA Activation Criteria The HSA system is designed to assist the driver in The following criteria must be met in order for HSA to launching a vehicle on an incline. HSA will maintain the activate: level of brake pressure the driver inputs for a short •...
Page 314
312 STARTING AND OPERATING The system will only work if the intended direction of the 3. Apply the parking brake. vehicle and vehicle gear match. For example, if the intended 4. Start the engine. direction is forward up a hill and the vehicle is in DRIVE and the activation criteria are met, HSA will activate.
STARTING AND OPERATING 313 • Over-steer - when the vehicle is turning more than EVIC Equipped Vehicles HSA is a Customer Programmable Feature on a EVIC appropriate for the steering wheel position. equipped vehicle. If you wish to turn off the HSA feature, •...
Page 316
314 STARTING AND OPERATING ESC Operating Modes reduction. This mode is intended to be used if the vehicle All ESC equipped vehicles can choose the following ESC is in deep snow, sand, or gravel conditions and more operating modes: wheel spin than ESC would normally allow is required to gain traction.
STARTING AND OPERATING 315 To turn ESC on again, momentarily press the “ESC Off” ESC Activation/Malfunction Indicator Light And switch. This will restore the normal “ESC On” mode of ESC OFF Indicator Light operation. The “ESC Activation/Malfunction Indicator Light” in the instrument cluster will come on WARNING! when the ignition switch is turned to the ON position.
316 STARTING AND OPERATING Malfunction Indicator Light” begins to flash during ac- TIRE SAFETY INFORMATION celeration, ease up on the accelerator and apply as little Tire Markings throttle as possible. Be sure to adapt your speed and driving to the prevailing road conditions. NOTE: •...
Page 319
STARTING AND OPERATING 317 • LT (Light Truck) - Metric tire sizing is based on U.S. NOTE: • P (Passenger) - Metric tire sizing is based on U.S. design standards. The size designation for LT-Metric design standards. P-Metric tires have the letter “P” tires is the same as for P-Metric tires except for the molded into the sidewall preceding the size designa- letters “LT”...
Page 320
318 STARTING AND OPERATING Tire Sizing Chart EXAMPLE: Size Designation: P = Passenger car tire size based on U.S. design standards ..blank..= Passenger car tire based on European design standards LT = Light truck tire based on U.S. design standards T = Temporary spare tire 31 = Overall diameter in inches (in) 215 = Section width in millimeters (mm)
Page 321
STARTING AND OPERATING 319 EXAMPLE: Service Description: 95 = Load Index — A numerical code associated with the maximum load a tire can carry H = Speed Symbol — A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions —...
320 STARTING AND OPERATING Tire Identification Number (TIN) Look for the TIN on the outboard side of black sidewall The TIN may be found on one or both sides of the tire, tires as mounted on the vehicle. If the TIN is not found on however, the date code may only be on one side.
STARTING AND OPERATING 321 Tire Terminology And Definitions Term Definition B-Pillar The vehicle B-Pillar is a structural member of the body located between the front and rear door (of a four-door vehicle) running from the sill to the roof. Cold Tire Pressure Cold tire inflation pressure is defined as the tire pressure after the vehicle has not been driven for at least 3 hours, or driven less than 1 mile (1.6 km) after sitting for a three hour period.
322 STARTING AND OPERATING Tire Loading And Tire Pressure Tire And Loading Information Placard Tire Placard Location NOTE: The proper cold tire inflation pressure is listed on the driver’s side B-Pillar. Tire and Loading Information Placard Tire Placard Location...
Page 325
STARTING AND OPERATING 323 axles must not be exceeded. For further information on This placard tells you important information about GAWRs, vehicle loading, and trailer towing, refer to the: “Vehicle Loading” in this section. 1) number of people that can be carried in the vehicle 2) total weight your vehicle can carry To determine the maximum loading conditions of your vehicle, locate the statement “The combined weight of...
Page 326
324 STARTING AND OPERATING 3. Subtract the combined weight of the driver and pas- NOTE: • The following table shows examples on how to calcu- sengers from XXX lbs or XXX kg. late total load, cargo/luggage, and towing capacities 4. The resulting figure equals the available amount of of your vehicle with varying seating configurations cargo and luggage load capacity.
326 STARTING AND OPERATING Safety WARNING! WARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and • Improperly inflated tires are dangerous and can increase your stopping distance. Use tires of the cause collisions. recommended load capacity for your vehicle.
STARTING AND OPERATING 327 Ride Comfort and Vehicle Stability WARNING! (Continued) Proper tire inflation contributes to a comfortable ride. • Unequal tire pressures from one side of the ve- Over-inflation produces a jarring and uncomfortable hicle to the other can cause the vehicle to drift to ride.
Page 330
328 STARTING AND OPERATING Tire pressures change by approximately 1 psi (7 kPa) per CAUTION! 12°F (7°C) of air temperature change. Keep this in mind when checking tire pressure inside a garage, especially in After inspecting or adjusting the tire pressure, al- the winter.
STARTING AND OPERATING 329 loading may be required for high-speed vehicle opera- Radial-Ply Tires tion. Refer to original equipment or an authorized tire WARNING! dealer for recommended safe operating speeds, loading and cold tire inflation pressures. Combining radial ply tires with other types of tires on your vehicle will cause your vehicle to handle WARNING! poorly.
330 STARTING AND OPERATING Spare Tire Matching Original Equipped Tire and Do not install more than one non-matching temporary Wheel – If Equipped use spare tire/wheel on the vehicle at any given time. The spare tire of your vehicle is equivalent in look and CAUTION! function as the original equipment tire and wheel found on the front or rear axle of your vehicle.
STARTING AND OPERATING 331 Since this tire has limited tread life the original equip- Full Size Spare – If Equipped ment tire should be repaired (or replaced) and reinstalled The full size spare is for temporary emergency use only. on your vehicle at the first opportunity. This tire may look like the original equipped tire on the front or rear axle of your vehicle, but it is not.
332 STARTING AND OPERATING your original equipment tire, replace (or repair) the Tire Spinning original equipment tire and reinstall on the vehicle at the When stuck in mud, sand, snow, or icy conditions, do not first opportunity. spin your vehicle’s wheels faster than 30 mph (48 km/h) or for longer than 30 seconds continuously without WARNING! stopping.
STARTING AND OPERATING 333 Tread Wear Indicators These indicators are molded into the bottom of the tread Tread wear indicators are in the original equipment tires grooves. They will appear as bands when the tread depth to help you in determining when your tires should be becomes 1/16 in (2 mm).
334 STARTING AND OPERATING Keep dismounted tires in a cool, dry place with as little WARNING! exposure to light as possible. Protect tires from contact • Do not use a tire, wheel size or rating other than with oil, grease, and gasoline. that specified for your vehicle.
STARTING AND OPERATING 335 SNOW TIRES WARNING! (Continued) Some areas of the country require the use of snow tires • Failure to equip your vehicle with tires having during the winter. All season tires can be identified by the adequate speed capability can result in sudden tire M+S designation on the tire sidewall.
336 STARTING AND OPERATING poorer than that of non-studded tires. Some states pro- The suggested rotation method is the “rearward cross” hibit studded tires; therefore, local laws should be shown in the following diagram. This rotation pattern checked before using these tire types. does not apply to some directional tires that must not be reversed.
STARTING AND OPERATING 337 TIRE PRESSURE MONITOR SYSTEM (TPMS) The TPM System will warn the driver of a low tire The Tire Pressure Monitor System (TPMS) will warn the pressure if the tire pressure falls below the low-pressure driver of a low tire pressure based on the vehicle recom- warning limit for any reason, including low temperature mended cold placard pressure.
Page 340
338 STARTING AND OPERATING For example, your vehicle may have a recommended CAUTION! cold (parked for more than three hours) placard pressure • The TPMS has been optimized for the original of 30 psi (207 kPa). If the ambient temperature is 68°F (20°C) and the measured tire pressure is 27 psi (186 kPa), equipment tires and wheels.
STARTING AND OPERATING 339 • Seasonal temperature changes will affect tire pressure, NOTE: • The TPMS is not intended to replace normal tire care and the TPMS will monitor the actual tire pressure in and maintenance, or to provide warning of a tire the tire.
Page 342
340 STARTING AND OPERATING Tire Pressure Monitoring Low Pressure Warnings sound a chime. If the ignition key is cycled, this sequence The “Tire Pressure Monitoring Telltale Light” will will repeat, providing the system fault still exists. The illuminate in the instrument cluster, a LOW TIRE “Tire Pressure Monitoring Telltale Light”...
STARTING AND OPERATING 341 NOTE: 5. Once you repair or replace the original road tire, and 1. The compact spare tire (if equipped) does not have a reinstall it on the vehicle in place of the compact spare, tire pressure monitoring sensor. Therefore, the TPMS will the TPMS will update automatically and the “Tire Pres- not monitor the pressure in the compact spare tire.
Page 344
342 STARTING AND OPERATING The TPMS consists of the following components: more of the four active road tires. In addition, the Electronic Vehicle Information Center (EVIC) will display • Receiver Module a graphic showing the pressure values of each tire with •...
Page 345
STARTING AND OPERATING 343 Should this occur, you should stop as soon as possible, display dashes (- -) in place of the pressure value to and inflate all tires with low pressure (those flashing in indicate which sensor is not being received. the EVIC graphic) to the vehicle’s recommended cold placard pressure value.
Page 346
344 STARTING AND OPERATING If the ignition key is cycled, this sequence will repeat, The EVIC will also display a CHECK TPM SYSTEM providing the system fault still exists. If the system fault message for a minimum of five seconds when a system no longer exists, the “Tire Pressure Monitoring Telltale fault related to an incorrect sensor location fault is Light”...
STARTING AND OPERATING 345 Monitoring Telltale Light” will remain ON, a chime will 5. Once you repair or replace the original road tire, and sound, and the EVIC will still display a flashing pressure reinstall it on the vehicle in place of the compact spare, value in the graphic display.
346 STARTING AND OPERATING The tire pressure sensors are covered under one of the as hard starting, stalling, and hesitations. If you experi- following licenses: ence these symptoms, try another brand of gasoline before considering service for the vehicle. United States ....KR5S18002015B Over 40 auto manufacturers worldwide have issued and Canada.
STARTING AND OPERATING 347 The manufacturer supports the use of reformulated gaso- Problems that result from using gasoline containing line. Properly blended reformulated gasoline will pro- Methanol or gasoline containing more than 10% Ethanol vide excellent performance and durability of engine and are not the responsibility of the manufacturer and may fuel system components.
348 STARTING AND OPERATING To fix a Non-FFV vehicle inadvertently fueled once with vehicles. The manufacturer recommends that gasoline E-85 perform the following: without MMT be used in your vehicle. The MMT content of gasoline may not be indicated on the gasoline pump, •...
STARTING AND OPERATING 349 Fuel System Cautions CAUTION! (Continued) • The use of fuel additives, which are now being CAUTION! sold as octane enhancers, is not recommended. Follow these guidelines to maintain your vehicle’s Most of these products contain high concentra- performance: tions of methanol.
350 STARTING AND OPERATING Carbon Monoxide Warnings WARNING! (Continued) • Guard against carbon monoxide with proper WARNING! maintenance. Have the exhaust system inspected Carbon monoxide (CO) in exhaust gases is deadly. every time the vehicle is raised. Have any abnor- Follow the precautions below to prevent carbon mal conditions repaired promptly.
STARTING AND OPERATING 351 the other sections of this manual for information on CAUTION! features that are common between Flexible Fuel and gasoline-only powered vehicles. Only vehicles with the E-85 fuel filler door label can operate on E-85. Ethanol Fuel (E-85) E-85 is a mixture of approximately 85% fuel ethanol and 15% unleaded gasoline.
Observing these precautions will avoid possible hard in MOPAR engine oils, and in equivalent oils meeting starting and/or significant deterioration in driveability Chrysler Specification MS-6395. The manufacturer re- during warm up. quires engine oils that are API Certified and meet the...
Because E-85 fuel contains less energy per gallon/liter tensive fleet testing, to provide additional protection to than gasoline, you will experience an increase in fuel Chrysler Group LLC engines. Use MOPAR or an consumption. You can expect your miles per gallon equivalent oil meeting the specification MS-6395.
354 STARTING AND OPERATING Maintenance CAUTION! Do not use ethanol mixture greater than 85% in your vehicle. It will cause difficulty in cold starting and may affect driveability. ADDING FUEL Fuel Filler Cap (Gas Cap) The gas cap is behind the fuel filler door, on the left rear quarter panel of the vehicle.
Page 357
STARTING AND OPERATING 355 CAUTION! • Damage to the fuel system or emission control system could result from using an improper fuel tank filler tube cap (gas cap). • A poorly fitting gas cap may cause the “Malfunc- tion Indicator Light (MIL)” to turn on. •...
356 STARTING AND OPERATING Loose Filler Cap Message WARNING! (Continued) If the vehicles diagnostic system determines that the fuel • Never add fuel when the engine is running. This is filler cap in loose, improperly installed, or damaged, a in violation of most state and federal fire regula- “gASCAP”...
STARTING AND OPERATING 357 VEHICLE LOADING The bar code allows a computer scanner to read the Vehicle Identification Number (VIN). Vehicle Certification Label Your vehicle has a certification label attached to the rear Gross Vehicle Weight Rating (GVWR) of the driver’s door. The GVWR is the total allowable weight of your vehicle.
358 STARTING AND OPERATING Overloading Loading The load carrying components (axle, springs, tires, To load your vehicle properly, first figure out its empty wheels, etc.) of your vehicle will provide satisfactory weight, axle by axle and side by side. Store heavier items service as long as you do not exceed the GVWR and front down low and be sure you distribute their weight as and rear GAWR.
STARTING AND OPERATING 359 To maintain warranty coverage, follow the requirements Gross Trailer Weight (GTW) and recommendations in this manual concerning ve- The GTW is the weight of the trailer plus the weight of all hicles used for trailer towing. cargo, consumables and equipment (permanent or tem- porary) loaded in or on the trailer in its loaded and If you have any questions or concerns after reviewing...
Page 362
360 STARTING AND OPERATING Gross Axle Weight Rating (GAWR) Trailer Tongue Weight (TW) The GAWR is the maximum capacity of the front and rear The tongue weight is the downward force exerted on the axles. Distribute the load over the front and rear axles hitch ball by the trailer.
STARTING AND OPERATING 361 Weight-Carrying Hitch Trailer Hitch Classification Definitions A weight-carrying hitch supports the trailer tongue Class Max. Trailer Hitch Industry weight, just as if it were luggage located at a hitch ball or Standards some other connecting point of the truck. These kinds of Class I - Light Duty 2,000 lbs (907 kg) hitches are the most popular on the market today and...
362 STARTING AND OPERATING Trailer Towing Weights (Maximum Trailer Weight Ratings) The following chart provides the maximum trailer weight ratings towable for your given drivetrain. Maximum Trailer Weight Ratings Max. GTW Max. Trailer Tongue Wt. Engine/Transmission Max. Frontal Area (Gross Trailer Wt.) (See Note 1) 2.4L/Auto See Note 2...
STARTING AND OPERATING 363 CAUTION! Towing a trailer with a larger than recommended frontal area could cause the engine to overheat or cause severe engine damage under extreme condi- tions. Trailer And Tongue Weight Always load a trailer with 60% to 65% of the weight in the front of the trailer.
364 STARTING AND OPERATING NOTE: Remember that everything put into or on the Towing Requirements trailer adds to the load on your vehicle. Also, additional To promote proper break-in of your new vehicle drive- factory-installed options, or authorized dealer-installed train components the following guidelines are recom- options, must be considered as part of the total load on mended: your vehicle.
Page 367
STARTING AND OPERATING 365 WARNING! WARNING! (Continued) • Safety chains must always be used between your Improper towing can lead to a collision. Follow these vehicle and trailer. Always connect the chains to guidelines to make your trailer towing as safe as the frame or hook retainers of the vehicle hitch.
Page 368
366 STARTING AND OPERATING • Check for signs of tire wear or visible tire damage WARNING! (Continued) before towing a trailer. Refer to “Tires – General 3. GAWR Information” in “Starting and Operating” for informa- 4. Trailer tongue weight rating for the trailer hitch tion on tread wear indicators and for proper inspection utilized (This requirement may limit the ability to procedure.
Page 369
STARTING AND OPERATING 367 • An electronically actuated trailer brake controller is WARNING! required when towing a trailer with electronically • Do not connect trailer brakes to your vehicle’s actuated brakes. When towing a trailer equipped with a hydraulic surge actuated brake system, an electronic hydraulic brake lines.
368 STARTING AND OPERATING Towing Tips If you REGULARLY TOW a trailer for more than 45 min- Before setting out on a trip, practice turning, stopping, utes of continuous operation, then change the automatic and backing the trailer in an area located away from transmission fluid and filter according to the interval heavy traffic.
STARTING AND OPERATING 369 • Use speed control in flat terrain and with light loads to RECREATIONAL TOWING maximize fuel efficiency. (BEHIND MOTORHOME, ETC.) Cooling System Towing This Vehicle Behind Another Vehicle To reduce potential for engine and transmission over- Recreational towing is not allowed.
372 WHAT TO DO IN EMERGENCIES HAZARD WARNING FLASHERS IF YOUR ENGINE OVERHEATS The Hazard Warning flasher switch is located on the In any of the following situations, you can reduce the instrument panel, below the radio. potential for overheating by taking the appropriate ac- tion.
WHAT TO DO IN EMERGENCIES 373 NOTE: There are steps that you can take to slow down Engine Oil Overheating (2.4L Engine Only) — an impending overheat condition: If Equipped During sustained high-speed driving or trailer tow up • If your air conditioner (A/C) is on, turn it off. The A/C long grades on a hot day, the engine oil temperature may system adds heat to the engine cooling system and become too hot.
374 WHAT TO DO IN EMERGENCIES JACKING AND TIRE CHANGING WARNING! (Continued) • The jack is designed to be used as a tool for WARNING! changing tires only. The jack should not be used to • Do not attempt to change a tire on the side of the lift the vehicle for service purposes.
WHAT TO DO IN EMERGENCIES 375 WARNING! Do not attempt to change a tire on the side of the vehicle close to moving traffic, pull far enough off the road to avoid the danger of being hit when operating the jack or changing the wheel. 2.
376 WHAT TO DO IN EMERGENCIES 6. Block both the front and rear of the WARNING! (Continued) wheel diagonally opposite the jacking • Always park on a firm, level surface as far from position. For example, if changing the the edge of the roadway as possible before raising right front tire, block the left rear the vehicle.
Page 379
WHAT TO DO IN EMERGENCIES 377 WARNING! (Continued) CAUTION! • If working on or near a roadway, be extremely Do not attempt to raise the vehicle by jacking on careful of motor traffic. locations other than those indicated in the Jacking •...
Page 380
378 WHAT TO DO IN EMERGENCIES NOTE: The jack handle attaches to the side of the jack 2. Loosen, but do not remove, the wheel nuts by turning with two attachment points. When the jack is partially them to the left one turn while the wheel is still on the expanded, the tension between the two attachment ground.
Page 381
WHAT TO DO IN EMERGENCIES 379 3. There is a front and rear jacking location on each side of the vehicle. Rear Jacking Location 4. Turn the jack screw to the left until the jack can be placed under the jacking location. Once the jack is Front Jacking Location positioned, turn the jack screw to the right until the jack head is properly engaged with the lift area closest to the...
Page 382
380 WHAT TO DO IN EMERGENCIES WARNING! CAUTION! Raising the vehicle higher than necessary can make Be sure to mount the spare tire with the valve stem the vehicle less stable. It could slip off the jack and facing outward. The vehicle could be damaged if the hurt someone near it.
WHAT TO DO IN EMERGENCIES 381 each nut has been tightened twice. The correct wheel nut WARNING! torque is 100 ft lbs (135 N·m). If you doubt that you have tightened the nuts correctly, have them checked with a A loose tire thrown forward in a collision or hard torque wrench by your authorized dealer or at a service stop could injure the occupants in the vehicle.
382 WHAT TO DO IN EMERGENCIES CAUTION! Do not use a portable battery booster pack or any other booster source with a system voltage greater than 12 Volts or damage to the battery, starter motor, alternator or electrical system may occur. WARNING! Do not attempt jump-starting if the battery is frozen.
Page 385
WHAT TO DO IN EMERGENCIES 383 3. Remove the protective cover over the remote positive WARNING! (+) battery post. To remove the cover, press the locking • Take care to avoid the radiator cooling fan when- tab and pull upward on the cover. ever the hood is raised.
384 WHAT TO DO IN EMERGENCIES 1. Connect the positive (+) end of the jumper cable to the WARNING! remote positive (+) post of the discharged vehicle. Do not allow vehicles to touch each other as this 2. Connect the opposite end of the positive (+) jumper could establish a ground connection and personal cable to the positive (+) post of the booster battery.
Page 387
WHAT TO DO IN EMERGENCIES 385 5. Start the engine in the vehicle that has the booster 10. Reinstall the protective cover over the remote posi- battery, let the engine idle a few minutes, and then start tive (+) battery post of the discharged vehicle. the engine in the vehicle with the discharged battery.
386 WHAT TO DO IN EMERGENCIES FREEING A STUCK VEHICLE NOTE: If your vehicle is equipped with Electronic If your vehicle becomes stuck in mud, sand, or snow, it Stability Control (ESC), turn the system to Partial OFF can often be moved by a rocking motion. Turn your before attempting to “rock”...
WHAT TO DO IN EMERGENCIES 387 SHIFT LEVER OVERRIDE WARNING! If a malfunction occurs and the shift lever cannot be moved out of the PARK position, you can use the Fast spinning tires can be dangerous. Forces gener- following procedure to temporarily move the shift lever: ated by excessive wheel speeds may cause damage, or even failure, of the axle and tires.
388 WHAT TO DO IN EMERGENCIES TOWING A DISABLED VEHICLE Towing Condition Wheels OFF the Ground ALL MODELS Flat Tow NONE If transmission is operable: • Trans in NEUTRAL • 25 mph (40 km/h)max speed Rear Wheel Lift Or Dolly Tow •...
Page 391
WHAT TO DO IN EMERGENCIES 389 The manufacturer recommends towing your vehicle with CAUTION! all four wheels OFF the ground using a flatbed. • Do not use sling type equipment when towing. If flatbed equipment is not available, and the transmis- Damage to the fascia will occur.
390 WHAT TO DO IN EMERGENCIES If the transmission is not operable, or the vehicle must Without The Ignition Key be towed faster than 25 mph (40 km/h) or farther than 15 Special care must be taken when the vehicle is towed with the ignition in the LOCK position.
MAINTAINING YOUR VEHICLE 395 ONBOARD DIAGNOSTIC SYSTEM — OBD II CAUTION! Your vehicle is equipped with a sophisticated onboard • Prolonged driving with the MIL on could cause diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic further damage to the emission control system.
396 MAINTAINING YOUR VEHICLE persists, the message will appear the next time the Normally, the OBD II system will be ready. The OBD II vehicle is started. This might indicate a damaged cap. If system may not be ready if your vehicle was recently the problem is detected twice in a row, the system will serviced, recently had a dead battery or a battery replace- turn on the “Malfunction Indicator Light (MIL).”...
MAINTAINING YOUR VEHICLE 397 4. Approximately 15 seconds later, one of two things will Regardless of whether your vehicle’s OBD II system is happen: ready or not, if the MIL is illuminated during normal vehicle operation you should have your vehicle serviced a.
Only do service work for which you mance. Immediately have potential malfunctions have the knowledge and the proper equipment. If examined by an authorized Chrysler Group LLC you have any doubt about your ability to perform a dealership or qualified repair center.
MAINTAINING YOUR VEHICLE 399 fully warmed engine is shut off. Do not check oil level CAUTION! (Continued) before starting the engine after it has sat overnight. • Your vehicle has been built with improved fluids Checking engine oil level when the engine is cold will that protect the performance and durability of give you an incorrect reading.
Page 402
API Certified and meet the will cause oil aeration, which can lead to loss of oil requirements of Chrysler Material Standard MS-6395. pressure and an increase in oil temperature. This could damage your engine. Also, be sure the oil fill American Petroleum Institute (API) Engine Oil cap is replaced and tightened after adding oil.
Page 403
MAINTAINING YOUR VEHICLE 401 Lubricants which do not have both the engine oil certi- CAUTION! fication mark and the correct SAE viscosity grade num- ber should not be used. Do not use chemical flushes in your engine oil as the chemicals can damage your engine.
402 MAINTAINING YOUR VEHICLE Lubricants which do not have both, the engine oil certi- Disposing Of Used Engine Oil And Oil Filters fication mark and the correct SAE viscosity grade num- Care should be taken in disposing of used engine oil and ber should not be used.
MAINTAINING YOUR VEHICLE 403 Engine Air Cleaner Filter Engine Air Cleaner Filter Selection The quality of replacement engine air cleaner filters WARNING! varies considerably. Only high quality filters should be used to assure most efficient service. MOPAR engine air The air induction system (air cleaner, hoses, etc.) can cleaner filters are high quality and are recommended.
Page 406
404 MAINTAINING YOUR VEHICLE WARNING! CAUTION! • Battery fluid is a corrosive acid solution and can • It is essential when replacing the cables on the burn or even blind you. Do not allow battery fluid battery that the positive cable is attached to the to contact your eyes, skin, or clothing.
MAINTAINING YOUR VEHICLE 405 Air Conditioner Maintenance WARNING! For best possible performance, your air conditioner • Use only refrigerants and compressor lubricants should be checked and serviced by an authorized dealer at the start of each warm season. This service should approved by the manufacturer for your air condi- include cleaning of the condenser fins and a performance tioning system.
406 MAINTAINING YOUR VEHICLE Refrigerant Recovery And Recycling The A/C Air Filter is located in the fresh air inlet behind R-134a air conditioning refrigerant is a hydrofluoro- the glove box. Perform the following procedure to re- carbon (HFC) that is endorsed by the Environmental place the filter: Protection Agency and is an ozone-saving product.
MAINTAINING YOUR VEHICLE 407 CAUTION! The A/C Air Filter is identified with an arrow to indicate airflow direction through the filter. Failure to install the filter properly will result in the need to replace it more often. 8. Reinstall the glove box door dampener and glove box. Body Lubrication Locks and all body pivot points, including such items as seat tracks, door hinge pivot points and rollers, liftgate,...
408 MAINTAINING YOUR VEHICLE hood latching components to ensure proper function. Operation of the wipers on dry glass for long periods When performing other underhood services, the hood may cause deterioration of the wiper blades. Always use latch, release mechanism and safety catch should be washer fluid when using the wipers to remove salt or dirt cleaned and lubricated.
MAINTAINING YOUR VEHICLE 409 Adding Washer Fluid Exhaust System The fluid reservoir for the windshield washers is located The best protection against carbon monoxide entry into in the engine compartment. Be sure to check the fluid the vehicle body is a properly maintained engine exhaust level in the reservoir at regular intervals.
Page 412
410 MAINTAINING YOUR VEHICLE WARNING! CAUTION! • Exhaust gases can injure or kill. They contain • The catalytic converter requires the use of un- carbon monoxide (CO), which is colorless and leaded fuel only. Leaded gasoline will destroy the odorless. Breathing it can make you unconscious effectiveness of the catalyst as an emissions con- and can eventually poison you.
Page 413
MAINTAINING YOUR VEHICLE 411 Under normal operating conditions, the catalytic con- To minimize the possibility of catalytic converter dam- verter will not require maintenance. However, it is im- age: portant to keep the engine properly tuned to assure • Do not shut off the engine or interrupt the ignition, proper catalyst operation and prevent possible catalyst when the transmission is in gear and the vehicle is in damage.
412 MAINTAINING YOUR VEHICLE Cooling System rusty in appearance, the system should be drained, flushed, and refilled with fresh engine coolant (anti- WARNING! freeze). Check the front of the A/C condenser for any accumulation of bugs, leaves, etc. If dirty, clean by gently •...
Page 415
MAINTAINING YOUR VEHICLE 413 Selection Of Coolant CAUTION! (Continued) Use only the manufacturer’s recommended coolant. Re- • Do not use water alone or alcohol-based engine fer to “Fluids, Lubricants, and Genuine Parts” in “Main- coolant (antifreeze) products. Do not use addi- taining Your Vehicle”...
Page 416
414 MAINTAINING YOUR VEHICLE Please review these recommendations for using Hybrid Please note that it is the owner’s responsibility to main- Organic Additive Technology (HOAT) engine coolant tain the proper level of protection against freezing ac- (antifreeze). When adding engine coolant (antifreeze): cording to the temperatures occurring in the area where the vehicle is operated.
Page 417
MAINTAINING YOUR VEHICLE 415 rules for your community. To prevent ingestion by ani- WARNING! mals or children, do not store ethylene glycol based • The warning words “DO NOT OPEN HOT” on engine coolant (antifreeze) in open containers or allow it to remain in puddles on the ground.
Page 418
416 MAINTAINING YOUR VEHICLE The radiator normally remains completely full, so there is If an examination of your engine compartment shows no no need to remove the radiator cap unless checking for evidence of radiator or hose leaks, the vehicle may be engine coolant (antifreeze) freeze point or replacing cool- safely driven.
MAINTAINING YOUR VEHICLE 417 • Make sure that the radiator and coolant recovery WARNING! bottle overflow hoses are not kinked or obstructed. Riding the brakes can lead to brake failure and • Keep the front of the radiator clean. If your vehicle is possibly a collision.
Page 420
418 MAINTAINING YOUR VEHICLE Clean the top of the master cylinder area before removing WARNING! the cap. If necessary, add fluid to bring the fluid level up • Use only manufacturer’s recommended brake to the requirements described on the brake fluid reser- voir.
MAINTAINING YOUR VEHICLE 419 WARNING! (Continued) WARNING! (Continued) • To avoid contamination from foreign matter or • Do not allow petroleum based fluid to contami- moisture, use only new brake fluid or fluid that nate the brake fluid. Brake seal components could has been in a tightly closed container.
Page 422
420 MAINTAINING YOUR VEHICLE Selection Of Lubricant Special Additives It is important that the proper lubricant is used in the Automatic Transmission Fluid (ATF) is an engineered transmission to assure optimum transmission performance. product and its performance may be impaired by supple- Use only the manufacturer’s recommended transmission mental additives.
Page 423
MAINTAINING YOUR VEHICLE 421 Fluid Level Check – 2.4L Engine 6. Remove the dipstick and determine if the fluid is hot Use the following procedure to check the automatic or cold. Hot fluid is approximately 180° F (82° C), which transmission fluid level properly: is the normal operating temperature after the vehicle is driven at least 15 miles (24 km).
422 MAINTAINING YOUR VEHICLE Fluid Level Check – 3.6L Engine CAUTION! The automatic transmission has no dipstick and is dealer • Using a transmission fluid other than the manu- serviced only. facturer’s recommended fluid may cause deterio- Transmission Fluid And Filter Changes ration in transmission shift quality and/or torque Refer to the “Maintenance Schedule”...
Page 425
MAINTAINING YOUR VEHICLE 423 hot or cold weather and other extreme conditions will Washing have an adverse effect on paint, metal trim, and under- • Wash your vehicle regularly. Always wash your ve- body protection. hicle in the shade using MOPAR Car Wash or equiva- The following maintenance recommendations will enable lent, or a mild car wash soap, and rinse the panels you to obtain maximum benefit from the corrosion...
Page 426
424 MAINTAINING YOUR VEHICLE • If you detect any stone chips or scratches in the paint, CAUTION! touch them up immediately. The cost of such repairs is • Do not use abrasive or strong cleaning materials considered the responsibility of the owner. such as steel wool or scouring powder, which will •...
Page 427
MAINTAINING YOUR VEHICLE 425 Wheel And Wheel Trim Care To minimize the possibility of scratching the lenses and All wheels and wheel trim, especially aluminum and reducing light output, avoid wiping with a dry cloth. To chrome-plated wheels, should be cleaned regularly with remove road dirt, wash with a mild soap solution fol- a mild soap and water to prevent corrosion.
Page 428
426 MAINTAINING YOUR VEHICLE • For grease stains, apply MOPAR Multi-Purpose if absolutely necessary. Do not use harsh cleaners or Cleaner or equivalent to a clean, damp cloth and Armor All . Use MOPAR Total Clean or equivalent to remove the stain. Use a fresh, damp towel to remove clean vinyl upholstery.
Page 429
MAINTAINING YOUR VEHICLE 427 Cleaning Plastic Instrument Cluster Lenses WARNING! The lenses in front of the instruments in this vehicle are molded in clear plastic. When cleaning the lenses, care Do not use volatile solvents for cleaning purposes. must be taken to avoid scratching the plastic. Many are potentially flammable, and if used in closed areas they may cause respiratory harm.
428 MAINTAINING YOUR VEHICLE Replace the belts if they appear frayed or worn or if the Installation buckles do not work properly. Align the liner in the cupholder and press down firmly. Cleaning Center Console Cupholders FUSES Removal Totally Integrated Power Module Grab the rubber portion of the cupholder and lift The Totally Integrated Power Module is located in the upward.
Page 431
MAINTAINING YOUR VEHICLE 429 Cartridge Mini Cavity Description Fuse Fuse Center High 10 Amp Mounted Stop Light — (CHMSL)/Brake Switch 10 Amp — Ignition Switch 20 Amp Trailer Tow – If — Yellow Equipped Power Mirror 10 Amp — Switch/Climate Con- Totally Integrated Power Module trols 30 Amp...
Page 432
430 MAINTAINING YOUR VEHICLE Cartridge Mini Cartridge Mini Cavity Description Cavity Description Fuse Fuse Fuse Fuse Battery Feed – Power 40 Amp — Radiator Fan Relay 40 Amp Seats – If Equipped/ Green Green PZEV Air Pump – If Cigar Lighter/ 15 Amp Equipped —...
Page 433
MAINTAINING YOUR VEHICLE 431 Cartridge Mini Cartridge Mini Cavity Description Cavity Description Fuse Fuse Fuse Fuse Ignition Run – Cli- Ignition Run – Occu- 10 Amp mate Controls/Hot pant Classification — 10 Amp Cupholder – If — Module (OCM)/ Equipped Occupant Restraint Controller (ORC) 15 Amp...
Page 434
432 MAINTAINING YOUR VEHICLE Cartridge Mini Cartridge Mini Cavity Description Cavity Description Fuse Fuse Fuse Fuse 30 Amp Auto Shutdown Anti-Lock Brakes — Pink (ASD) Relay 1 (ABS) Module – If 40 Amp Equipped/Electronic Switch Bank/ — Green Stability Control Diagnostic Link 10 Amp (ESC) Module –...
MAINTAINING YOUR VEHICLE 433 VEHICLE STORAGE CAUTION! If you will not be using your vehicle for more than • When installing the Totally Integrated Power 21 days, you may want to take steps to preserve your battery. Module cover, it is important to ensure the cover is properly positioned and fully latched.
434 MAINTAINING YOUR VEHICLE REPLACEMENT BULBS LIGHT BULBS – Exterior Bulb No. All the inside bulbs are brass or glass wedge base. Bi-Halogen Headlamp ....HIR2 Aluminum base bulbs are not approved and should not (Serviced at Authorized Dealer) be used for replacement.
MAINTAINING YOUR VEHICLE 435 this, you should not attempt to service a headlamp bulb Front Turn Signal yourself. If a headlamp bulb fails, take your vehicle to 1. Raise and prop open the hood. an authorized dealer for service. 2. Rotate the bulb’s electrical connector one-quarter turn WARNING! counterclockwise and remove it from the headlamp housing.
436 MAINTAINING YOUR VEHICLE 1. Rotate the bulb’s electrical connector one-quarter turn Backup Lamps counterclockwise and remove it from the fog lamp hous- 1. Open the trunk and gently pull back the trunk liner ing. behind the tail lamp. 2. Remove the bulb from the connector socket and install 2.
MAINTAINING YOUR VEHICLE 437 3. Grasp the tail lamp and pull firmly outward pushing 4. Twist and remove socket from lamp. on the studs from inside to disengage the lamp housing. 5. Remove bulb from socket and replace. NOTE: Placing a small flat head screwdriver or similar License Plate Lamp tool between the lamp outboard ball stud and plastic grommet from inside the trunk can assist in lamp re-...
Use API Certified SAE 5W-20 Engine Oil, meeting the requirements of Engine Oil – 2.4L Engine Chrysler Material Standard MS-6395. Refer to your engine oil filler cap for correct SAE grade. Use API Certified SAE 5W-30 Engine Oil, meeting Chrysler Material Stan- Engine Oil –...
440 MAINTAINING YOUR VEHICLE Chassis Component Fluid, Lubricant, or Genuine Part MOPAR ATF+4 Automatic Transmission Fluid or equivalent licensed Automatic Transmission ATF+4 product. MOPAR DOT 3 and SAE J1703 should be used. If DOT 3 brake fluid is not Brake Master Cylinder available, then DOT 4 is acceptable.
Page 444
442 MAINTENANCE SCHEDULES MAINTENANCE SCHEDULE On Non-EVIC equipped vehicles “Change Oil” will flash The Scheduled Maintenance services listed in this in the instrument cluster odometer and a single chime manual must be done at the times or mileages specified will sound, indicating that an oil change is necessary. to protect your vehicle warranty and ensure the best Based on engine operation conditions the oil change vehicle performance and reliability.
Page 445
MAINTENANCE SCHEDULES 443 • Change your engine oil more often if you drive your At Each Stop For Fuel vehicle off-road for an extended period of time. • Check the engine oil level about five minutes after a • Under no circumstances should oil change intervals fully warmed engine is shut off.
Page 446
444 MAINTENANCE SCHEDULES Once A Month At Each Oil Change • Check tire pressure and look for unusual wear or • Change the engine oil filter. damage. • Inspect the brake hoses and lines. • Inspect the battery and clean and tighten the terminals CAUTION! as required.
Page 447
MAINTENANCE SCHEDULES 445 8,000 Miles (13,000 km) or 16,000 Miles (26,000 km) or 12 Months Maintenance Service 6 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. Schedule ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before ❏...
446 MAINTENANCE SCHEDULES 24,000 Miles (39,000 km) or 32,000 Miles (52,000 km) or 24 Months Maintenance Service 18 Months Maintenance Schedule ❏ Change the engine oil and engine oil filter. Service Schedule ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before ❏...
Page 449
MAINTENANCE SCHEDULES 447 40,000 Miles (65,000 km) or 48,000 Miles (78,000 km) or 36 Months Maintenance Service 30 Months Maintenance Schedule ❏ Change the engine oil and engine oil filter. Service Schedule ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before ❏...
Page 450
448 MAINTENANCE SCHEDULES 56,000 Miles (91,000 km) or 64,000 Miles (104,000 km) or 48 Months Maintenance Service 42 Months Maintenance Schedule ❏ Change the engine oil and engine oil filter. Service Schedule ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before ❏...
Page 451
MAINTENANCE SCHEDULES 449 72,000 Miles (117,000 km) or 80,000 Miles (130,000 km) or 60 Months Maintenance Service 54 Months Maintenance Schedule ❏ Change the engine oil and engine oil filter. Service Schedule ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before ❏...
Page 452
450 MAINTENANCE SCHEDULES 88,000 Miles (143,000 km) or 96,000 Miles (156,000 km) or 72 Months Maintenance Service 66 Months Maintenance Schedule ❏ Change the engine oil and engine oil filter. Service Schedule ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before ❏...
Page 453
MAINTENANCE SCHEDULES 451 104,000 Miles (169,000 km) or 112,000 Miles (182,000 km) or 84 Months Maintenance Service 78 Months Maintenance Schedule ❏ Change the engine oil and engine oil filter. Service Schedule ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before ❏...
Page 454
452 MAINTENANCE SCHEDULES 120,000 Miles (195,000 km) or 128,000 Miles (208,000 km) or 96 Months Maintenance Service 90 Months Maintenance Schedule ❏ Change the engine oil and engine oil filter. Service Schedule ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before ❏...
Page 455
MAINTENANCE SCHEDULES 453 136,000 Miles (221,000 km) or 144,000 Miles (234,000 km) or 108 Months Maintenance Service 102 Months Maintenance Schedule ❏ Change the engine oil and engine oil filter. Service Schedule ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before ❏...
Page 456
454 MAINTENANCE SCHEDULES 152,000 Miles (247,000 km) or 114 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 152,000 miles (247 000 km). Odometer Reading Date Repair Order #...
Page 457
MAINTENANCE SCHEDULES 455 † This maintenance is recommended by the manufacturer to the owner, but is not required to maintain emissions warranty. WARNING! • You can be badly injured working on or around a motor vehicle. Do only service work for which you have the knowledge and the right equipment.
If You Need Assistance ....459 Reporting Safety Defects ....462 Chrysler Group LLC Customer Center ..460 In The 50 United States And Washington, D.C.
Page 460
458 IF YOU NEED CONSUMER ASSISTANCE Department Of Transportation Uniform Tire Traction Grades ..... 465 Quality Grades ......465 Temperature Grades .
IF YOU NEED CONSUMER ASSISTANCE 459 SUGGESTIONS FOR OBTAINING SERVICE FOR the service advisor and list the items in order of priority. YOUR VEHICLE At many authorized dealers, you may obtain a rental vehicle at a minimal daily charge. If you need a rental, it Prepare For The Appointment is advisable to make these arrangements when you call If you’re having warranty work done, be sure to have the...
460 IF YOU NEED CONSUMER ASSISTANCE This is why you should always talk to an authorized Chrysler Group LLC Customer Center dealer’s service manager first. Most matters can be re- P.O. Box 21–8004 solved with this process. Auburn Hills, MI 48321–8004 Phone: (800) 247–9753...
IF YOU NEED CONSUMER ASSISTANCE 461 Customer Assistance For The Hearing Or Speech the manufacturer’s service contracts. If you purchased a Impaired (TDD/TTY) manufacturer’s service contract, you will receive Plan To assist customers who have hearing difficulties, the Provisions and an Owner Identification Card in the mail manufacturer has installed special TDD (Telecommuni- within three weeks of the vehicle delivery date.
See the Warranty Information Booklet, located on the has also made a major investment in facilities, tools, and DVD, for the terms and provisions of Chrysler Group training to assure that you are absolutely delighted with LLC warranties applicable to this vehicle and market.
IF YOU NEED CONSUMER ASSISTANCE 463 If NHTSA receives similar complaints, it may open an In Canada investigation, and if it finds that a safety defect exists in If you believe that your vehicle has a safety defect, you a group of vehicles, it may order a recall and remedy should contact the Customer Service Department imme- campaign.
Page 466
Chrysler Group LLC ve- maintaining, servicing, and repairing Chrysler Group hicles. Included are starting, operating, emergency LLC vehicles. A complete working knowledge of the...
Page 467
IF YOU NEED CONSUMER ASSISTANCE 465 DEPARTMENT OF TRANSPORTATION UNIFORM significantly from the norm due to variations in driving TIRE QUALITY GRADES habits, service practices, and differences in road charac- The following tire grading categories were established by teristics and climate. the National Highway Traffic Safety Administration.
Page 468
466 IF YOU NEED CONSUMER ASSISTANCE Temperature Grades WARNING! The temperature grades are A (the highest), B, and C, representing the tire’s resistance to the generation of heat The temperature grade for this tire is established for and its ability to dissipate heat, when tested under a tire that is properly inflated and not overloaded.
Page 488
486 INDEX Vehicle Theft Alarm (Security Alarm) ..18 Wheel and Wheel Trim Care ....425 Viscosity, Engine Oil .
Page 489
INSTALLATION OF RADIO TRANSMITTING EQUIPMENT Special design considerations are incorporated into this The antenna cable should be as short as practical and vehicle’s electronic system to provide immunity to radio routed away from the vehicle wiring when possible. Use frequency signals. Mobile two-way radios and telephone only fully shielded coaxial cable.
Page 490
Chrysler Group LLC 11C41-126-AE Printed in U.S.A. Fifth Edition...
Need help?
Do you have a question about the 200 2011 and is the answer not in the manual?
Questions and answers