Backup Lamps (Driver Side) - Chrysler 200 2017 Owner's Manual

6. Rotate the backup lamp socket counter clockwise 1/4
turn to remove the backup lamp socket from the trunk
lid lamp housing.
Backup Lamp Socket
7. Remove the bulb from the socket and install the replace-
ment bulb.
8. Install the backup lamp socket into the trunk lid lamp
housing.
9. Rotate backup lamp socket clockwise 1/4 turn to lock it
into place.
MAINTAINING YOUR VEHICLE 517
10. Reposition the inner deck panel and secure with a push
pin if removed.
11. Install access cover.

Backup Lamps (Driver Side)

1. Open trunk lid.
2. Remove the drivers side access cover.
3. Remove inner deck lid support push pin.
NOTE: If necessary remove any additional inner deck lid
trim push pins to gain access.
4. Gently pull back the inner deck panel behind the trunk
lid lamp housing to expose the backup lamp socket.
NOTE: Passenger side is shown. The driver's side is
similar.
7