Fcw Limited Warning; Service Fcw Warning; Lanesense - If Equipped; Lanesense Operation - Chrysler 200 2017 Owner's Manual

Hide thumbs Also See for 200 2017:
Table of Contents

Advertisement

you when you are farther away and it applies limited
braking. This gives you the most reaction time to avoid a
possible collision.
Changing the FCW status to the "Near" setting, allows the
system to warn you of a possible collision with the vehicle
in front of you when you are much closer. This setting
provides less reaction time than the "Far" setting, which
allows for a more dynamic driving experience.
NOTE:
• The system will retain the last setting selected by the
driver after ignition shut down.
• FCW may not react to irrelevant objects such as over-
head objects, ground reflections, objects not in the path
of the vehicle, stationary objects that are far away,
oncoming traffic, or leading vehicles with the same or
higher rate of speed.
• FCW will be disabled like ACC, with the unavailable
screens.

FCW Limited Warning

If the instrument cluster display reads "ACC/FCW Lim-
ited Functionality" or "ACC/FCW Limited Functionality
Clean Front Windshield" momentarily, there may be a
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 167
condition that limits FCW functionality. Although the
vehicle is still drivable under normal conditions, the active
braking may not be fully available. Once the condition that
limited the system performance is no longer present, the
system will return to its full performance state. If the
problem persists, see your authorized dealer.

Service FCW Warning

If the system turns off, and the instrument cluster display
reads:
• ACC/FCW Unavailable Service Required
• Cruise/FCW Unavailable Service Required
This indicates there is an internal system fault. Although
the vehicle is still drivable under normal conditions, have
the system checked by an authorized dealer.
LANESENSE — IF EQUIPPED

LaneSense Operation

The LaneSense system is operational at speeds above
37 mph (60 km/h) and below 112 mph (180 km/h). The
LaneSense system uses a forward looking camera to detect
lane markings and measure vehicle position within the
lane boundaries.
3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents