Insportline IN 14171 Galicum User Manual page 30

2. BT device matching and APP working:
Step 1: Place the iPad in the area in front of the LED screen. You can attach it there.
Step 2: Enter "iPad Settings program".
Step 3: Open BT and the iPad will detect all BT devices within range. Find the Treadmill BT
device's name and click on it to match them. If you detect many BT devices and cannot recognize
the corresponding name, contact the dealer.
Step 4: Wait for a few seconds until the status of the device changes to "connected". Then check
if find the figure on the top right corner of the iPad (white mark means that BT has been
matched successfully / grey mark means, that BT is still open and not matched).
Step 5: After the BT is matched successfully, the LED display will show a white background and
the display "BT". That means, the computer also has connected with the iPad successfully.
Step 6: Press "HOME" button
on the iPad and the screen will go to the iPad desktop and will
execute APP, which downloaded.
Step 7: (After executed APP). When APP connects with the computer successfully, the APP icon
on the screen will be unlocked. Then you can use the APP page to control the treadmill.
Step 8: After each using of the APP press "HOME" button on the iPad twice, close recently used
APP in the background (as figures below). Then go back to the iPad Settings page to close the BT
function. The computer will beep and will return to the regular LED operation display.
30