Adding A Station To Create A Conference Call - Toshiba Strata DK PC Attendant Console User Manual

3. Upon answering the
call, select the held
party in the Loop box
...or highlight the
held party name, and
then select the Join
button.
4. Select the Exit
button.

Adding a Station to Create a Conference Call

You can add another station to the current call connection to create a conference call.
1. Select the Conf/
Trns button.
2. Enter the number to
dial or dial by name
using the directory.
3. Select the Dial
button. If you do not
receive an answer,
select the Return
button.
4. Select the Join
button after the party
answers.
Strata DK PC Attendant Console
You are now connected to the source and destination
parties in a three-way conference. The Active Call
Window displays XXX + YYY, the source and
destination party's station numbers.
The console exits the conference. The source and
destination parties remain joined.
The current call is placed on hold. You hear internal
dial tone. If connected to two CO Lines, both will
display in the Loop box.
The Conference/Transfer dialog box provides an entry
for dialing.
Listen for a busy or no answer so that you can return
to the original connection.
All parties are conferenced.
5/00
Basic Calling
Conference Calls
51