2N Helios IP Safety Installation Manual page 55

3.2 Maintenance
Cleaning
If used frequenly, the device surface gets dirty. To clean it, use a piece of soft cloth
moistened with clean water. We recommend you to follow these principles while
cleaning:
Never use aggressive detergents (such as abrasives or strong disinfectants).
Alcohol-based cleaners may be applied.
Clean the device in dry weather in order to make waste water evaporate quickly.
We recommend using cleaning wipes designed for IT / electronic items.
Tip
®
The 2N
9152101M
Future Programming Changes
For necessary steps refer to the preceding subsections. Keep the following for future
changes:
This manual
Caution
Always use the product for the purpose it was designed and
manufactured for, in compliance herewith.
The manufacturer reserves the right to modify the product in order to
improve its qualities.
®
2N Helios IP Safety
When the product's service life is exhausted and you would like to
dispose of it please do so in accordance with applicable legal
regulations.
2N TELEKOMUNIKACE a.s., www.2n.cz
Helios IP Safety models of Part Nos. 9152101
W may be cleaned with WAP high pressure washers.
contains no environmentally harmful components.
W , 9152102 W and
55/65