Table of Contents
Advertisement
Open the locking latch.
5.
The access panel slides back, releasing it from the chassis.
Lift and remove the access panel.
6.
To replace the component, reverse the removal procedure.
Air baffle
CAUTION:
expansion slot covers, or blanks installed. If the server supports hot-plug components, minimize
the amount of time the access panel is open.
To remove the component:
Power down the server (on page 26).
1.
Remove all power:
2.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Do one of the following:
3.
Extend the server from the rack (on page 27).
o
Remove the server from the rack (on page 29).
o
Remove the access panel
4.
For proper cooling, do not operate the server without the access panel, baffles,
("Access
panel" on page 34).
Removal and replacement procedures 35
Advertisement
Table of Contents
