Pcie/Pci/Pnp Configuration - Supermicro Desktop 5130DQ-IL User Manual

Desktop 5130DQ-IL User's Manual

PCIe/PCI/PnP Configuration

PCH SLOT1 PCI-E 3.0 X1 OPROM,
PCH SLOT2 PCI-E 3.0 X4 OPROM
CPU SLOT3 PCI-E 3.0 X16 OPROM
Select Disabled to deactivate the selected slot, Legacy to activate the slot in legacy mode
and EFI to activate the slot in EFI mode. The options are Disabled, Legacy, and EFI.
Onboard LAN Option ROM type
Use this feature to select the type of option ROM installed. The options are EFI and Legacy.
Onboard LAN1 Option ROM
Select PXE (Preboot Execution Environment) to boot the computer using a PXE device
installed in a specified LAN port. Select Disabled to prevent system boot using a device
installed in a LAN port. The options are Disabled and PXE.
Network Stack
Select Enabled to enable PXE (Preboot Execution Environment) or UEFI (Unified Extensible
Firmware Interface) for network stack support. The options are Enabled and Disabled. If this
feature is enabled, the two features below are available.
Ipv4 PXE Support
Select Enabled to enable Ipv4 PXE (Preboot Execution Environment) for boot support. If
this feature is set to Disabled, Ipv4 PXE boot option will not be supported. The options are
Enabled and Disabled.
Ipv6 PXE Support
Select Enabled to enable Ipv6 PXE (Preboot Execution Environment) for boot support. If
this feature is set to Disabled, Ipv6 PXE boot option will not be supported. The options are
Enabled and Disabled.
72