Yamaha fwx120 Operation Manual page 56

Connecting to the Internet as a router
B
Terminal broadband
connection over DHCP
or static IP address
(from page 51)
3
1
2
3
56  FWX120 Operation Manual
2  Specifying your provider information
Enter the configuration name.
Enter a descriptive destination name. It is a good idea to name the configuration so
that you can easily identify it when it needs to be modified.
Specify the WAN IP address.
If the IP address is not assigned by your provider:
Click "DHCP client" to select it.
If the DHCP client identification name is assigned by your provider, enter that
identification name in the "DHCP client identification name" (there is no need to
enter it if it is not assigned by your provider).
If the IP address is assigned by your provider:
Click "Static IP address" and then configure the following settings.
• WAN IP address: Enter the IP address assigned by your provider in numeric
characters.
• netmask: Select the netmask assigned by your provider.
• Default gateway: Enter the default gateway address assigned by your provider
in numeric characters.
Click "Next".
The "Configure provider 3/4" screen appears.
1
Fill in
2
Specify
3
Click