Yamaha fwx120 Operation Manual page 16

Connecting (to an existing network) as a transparent mode firewall
2
3
4
5
16  FWX120 Operation Manual
4
Plug the power cord of this product into an electrical outlet.
Place the POWER switch in the ON position.
The POWER lamp lights up after flashing several times.
Power your PC or hub.
If the LAN1 and LAN2 lamps on the front panel light up or flash, the product is correctly
connected to your PC or hub.
/ If the LAN1 lamp does not light up or flash:
• Check that the LAN cable is correctly connected and your PC or hub is powered on.
• The LAN1 lamp does not light up or flash unless all the PCs and hubs that are connected
to the product are powered on.
/ If the LAN2 lamp does not light up or flash:
Check that the product is connected correctly to the router (hub) and the router (hub) is
powered on.
Now, the connecting procedures are completed.
Proceed with other preparations.
4
LA N 1
3
2
1
LE
C O N S O
S P E E D
AT A
LI N K /D
3
Plug into
an outlet
17
See page
