The Lan1 Side; Preparation 5: Configuring The Ip Address On The Lan1 Side - Yamaha fwx120 Operation Manual

Preparation 5
Configuring the IP address on

the LAN1 side

To connect LANs at different locations via broadband connections, make sure the
network addresses for LANs do not overlap. Determine a new network address for
each LAN and configure the IP address and netmask according to the new network
address on the product and PC.
NOTE
If a different network address has already been configured, give the product the IP address
and netmask according to that network address. Make sure the product has an IP address
that does not overlap with the one assigned to other devices installed within the LAN.
1
Click "Advanced settings" on the top page of
"Basic configuration page".
The "Advanced settings" screen appears.
2
Click "Configure" to the right of "Configure LAN
(IP address, DHCP server)".
The "Configure LAN" screen appears.
Connecting to the Internet as a router
2
Click
FWX120 Operation Manual  45
3
1
Click