Table of Contents
Advertisement
2
Check the connection mode that is automatically determined
and then click "Next".
3
Click "Next".
The setting screen corresponding to the connected line appears.
The following configurations vary depending on the connected line. For details,
refer to the description for the connection line you selected.
If no line was chosen
Failed to automatically determine broadband line.
Select "Terminal broadband connection over PPPoE" or "Terminal broadband
connection over DHCP or static IP address" to your connection type and then click
"Next".
If you are not sure which connection type you use currently, check the contract or
contact your provider.
A
When "Terminal broadband connection over
PPPoE" is selected:
B
When "Terminal broadband connection over
DHCP or static IP address" is selected:
Connecting to the Internet as a router
See page
See page
FWX120 Operation Manual 51
3
52
56
Advertisement
Table of Contents
