Annex; Changing The Ip Addresses Of Pcs - Yamaha fwx120 Operation Manual

Chapter 9

Annex

Annex

Changing the IP addresses of PCs

To change the IP address of the PC, take the
following steps.
For Windows 7
1
Click the "Start" button, then click
"Control Panel".
2
Enter "Adapter" in the search field at
the upper right in Control Panel, and
under "Network and Sharing Center",
click "View network connections".
3
Right-click the connection that you want
to change. From the short cut menus
9
that appear, click "Properties".
4
Click the "Network" tab.
5
In the "This connection uses the
following items" field, click to select
"Internet Protocol Version 4 (TCP/IPv4)",
and then click "Properties".
188  FWX120 Operation Manual
6
Select "Obtain an IP address
automatically" and "Obtain DNS server
address automatically", and then click
"OK".
7
In the "Local Area Connection
Properties" window, click "Close".
8
Click the "Start" button, then click "All
Programs" - "Accessories" - "Command
Prompt".
9
Type in "ipconfig /release", and press
the Enter key.
The IP address assigned to the PC is released.
10
Type in "ipconfig /renew", and press the
Enter key.
New IP address is assigned to the PC.
11
Repeat Steps 1 to 10 on all PCs in the
LAN, so that all PCs have different IP
addresses.