Yamaha fwx120 Operation Manual page 124

Implementing site-to-site VPN connections
Gaining remote access using PPTP
(Continued from the previous page)
11
Under "Logon security", select "Allow
these protocols", select the check box
as shown below and then click "OK".
5
• Unencrypted password (PAP): Unchecked
• Challenge Handshake Authentication
Protocol (CHAP): Unchecked
• Microsoft CHAP Version 2 (MS-CHAP v2):
Checked
• Automatically use my Windows logon
name and password (and domain, if any):
Unchecked
NOTE
Windows Vista does not support Microsoft CHAP
Version 1 (MS-CHAP). Check the settings you
configured in Step 4 on page 118.
12
Click "Networking" tab and then select
"Automatic" for "Type of VPN".
13
Click "OK" in the "VPN_PPTP Properties"
window and close the window.
124  FWX120 Operation Manual
14
Enter the user ID in "User name" and
connect password in "Password" you
set in Step 4 on page 118 and click
"Connect".
VPN connection to the product now begins.
NOTE
If you select the "Save this user name and
password for the following users:" check box,
you no longer need to enter the user name and
password.
To disconnect the connection
Clicking "Disconnect" ends the connection with
the product.