Yamaha fwx120 Operation Manual page 29

3 Specifying the DNS server address
1
Specify the DNS server address.
NOTE
If "Use DHCP server function" is selected in the "Configure firewall 3/6" screen, "Do not
specify DNS server address or auto-retrieve from DHCP server" cannot be selected.
If the DNS server address is not specified:
Click "Do not specify DNS server address or auto-retrieve from DHCP server" to
select it.
If the DNS server address is specified:
Click "Specify DNS server" to select it, and then configure the following settings:
• Primary DNS server address: Type the DNS server address in numeric characters.
• Secondary DNS server address: Fill out the field if you have two DNS server addresses
(leave this field blank if you have only one address specified).
2
Click "Next".
The "Configure firewall 5/6" screen appears.
Connecting (to an existing network) as a transparent mode firewall
1
Specify
2
Click
FWX120 Operation Manual  29
2