Mode Firewall - Yamaha fwx120 Operation Manual

Connecting (to an existing network) as a transparent mode firewall
Preparation 5
Configuring the transparent
2

mode firewall

Before configuring the settings
26  FWX120 Operation Manual
Specify the IP address in the "Basic configuration page" of the product to connect to
the existing network.
To use the product as a router, refer to "Connecting to the Internet as a router" (page 32).
NOTE
• The descriptions in this manual use Internet Explorer 11 screens as examples. For other
environments, you have slightly different screen displays, though operations stay the
same.
• When the transparent mode firewall is configured, some settings can no longer be
configured. For more details, click "Help" on the setup screen and refer to the description
displayed.
To connect to an existing network, you are required to have the following information
(some connection modes may not need all of the information).
• IP address
• Netmask
• Name server addresses (DNS server address, name server IP address, and DNS server
IP address)
• Default gateway address