Yamaha fwx120 Operation Manual page 105

3
Select "LAN-to-LAN network over IPsec"
and then click "Next".
The "Register/Modify VPN connection setting"
screen appears.
4
Configure the required settings and then
click "Submit".
The connection destination is registered.
For more details on the settings, click "Help"
on the setup screen and refer to the description
displayed.
Implementing site-to-site VPN connections
Connecting with IPsec
If authentication succeeds on both sites, the IPsec
communication is automatically established (no
manual operations are required). Once the IPsec
connections are complete, the top page of the
"Basic configuration page" shows a message,
"Connected".
NOTE
• For the IPsec connection, both sites must have the
same pre-shared key.
• A pre-shared key is a password that provides
important information. Any pre-shared key must be
long and not easily guessed by outsiders. Use a
combination of alphanumeric characters, lower and
upper case, and symbols. Great care is needed in
managing these keys.
FWX120 Operation Manual  105
5