Operation, Cleaning And Maintenance - Saeco Aulika Sup 040R Service Manual

AULIKA
3.3.

Operation, cleaning and maintenance

1 Fill the water tank
Fill the coffee container with
2
beans.
3 Turn the machine on
Press the key to start the
4
machine
5 Select the desired language
6 Heating
7 Rinse
8 Machine ready
A Empty the grounds drawer
B Empty the drip tray
C Clean the water tank
D Clean the coffee beans container.
E Clean the chassis
Clean the brewing unit
F Lubricate the brewing unit
Brewing unit seat cleaning
H Descaling
I Cleaning of the cappuccinatore with a detergent
Hardness Water hardness
1 Soft (up to 7°dH)
2 Medium (7°-14dH)
3 Hard (15°-21°dH)
4 Very hard
(above 21°dH)
The default water hardness is 4. A litre of water corresponds to about 2,000 pulses.
Operation
Save it
The heating phase starts, please wait until it is completed.
The machine performs a rinsing cycle on the internal circuits.
The machine is ready to deliver its products.
CELANING AND TECHNICAL ASSISTANCE
Descaling intervals
Without water softener
240 litres (480,000 pulses)
120 litres (240,000 pulses)
60 litres (120,000 pulses)
30 litres (60,000 pulses)
Rev. 00 / July 2012
03 USER GUIDE
If the signal is on
If needed (floater)
Once a week
If needed
If needed
Every time the beans are refilled or once a week.
After 500 deliveries
Once a week
If the signal is on
Before its return
With water softener
480 litres (960,000 pulses)
240 litres (480,000 pulses)
120 litres (240,000 pulses)
60 litres (120,000 pulses)
Page 07 / 07