Fault Finding; Test Mode - Saeco Aulika Sup 040R Service Manual

AULIKA
5.1.

Test mode

SX1
SX3
KEY
SX1 Espresso
SX2 Coffee
SX3 Hot water
SX4 Access to the Special menu
DX1 Cappuccino
DX2 Milk coffee
DX3 Cleaning cycle
DX4 Access while in Stand-by
To access the Test Mode:
- Turn on the machine
- Press the four function keys in sequence (SX4, SX1, SX2, SX3) before the initialization bar is
complete.
The Test Mode pages all have the following structure:
- The names of the loads that can be activated with the keys shown in each sector are displayed
in yellow.
- The sectors that provide information on the status of the sensors are displayed in green.
- The keys DX1 (next page) and DX3 (previous page) are shown in white.
Thus loads can be activated by the relevant keys SX1,SX2,SX3,SX4 from the left keypad, or by the
DX2, DX4 keys from the right keypad.
On page 2 Brew Unit there is an exception to this rule, as SX4 displays the status of a
sensor, not a load that can be activated.
SX2
SX4
MAIN FUNCTION
SX1
SX3
Info1 Info2
Info4 Info5
Display
Next page of the Test Mode menu
Previous page of the Test Mode menu
Exit the Test Mode from page 1
Title
SX2 DX1
SX4 DX3
Info6
Rev. 00 / July 2012

05 FAULT FINDING

DX1
DX2
DX3 DX4
SECONDARY FUNCTION
DX2
DX4
Info3
Info7
Page / 08 01