Table of Contents
Advertisement
SC811 Chassis Manual
A-4 Cables Included with the SC811T Chassis (SCSI)
Part #
CBL-0061
Note: Items may change without notice. Refer to http://www.supermicro.com for
the latest information.
A-5 Compatible Cables
These cables are compatible with the SC811 chassis.
Alternate SAS/SATA Cables
Some compatible motherboards have different connectors. If your motherboard
has only one SAS connector that the SAS/SATA cables must share, use one of the
following cables. These cables must be purchased separately.
Cable Name: SAS Cable
Part #: CBL-0175L
Alt. Name: "Big Four"
Description: This cable has one SFF-8484 (32-pin) connector on one end and four
SAS connectors (with seven pins each) at the other. This cable connects from the
host (motherboard or other controller) to the backplane's SAS hard drive port.
Cable Name: SAS Cable
Part #: CBL-0116
Alt. Name: iPass or "Small Four"
Description: This cable has one iPass (SFF-8087/Mini-SAS) connector (36-pin) at
one end and four SAS connectors on one end. This cable connects from the host
(motherboard or other controller) to the backplane's SAS hard drive port.
SC811T
Type
Length
Cable
13.8 inches
A-2
Description
Amphenol Serial ATA cable
Quantity: 1
Quantity: 1
Advertisement
Table of Contents
