Other Chassis Components; Changing The Dvd-Rom; Changing The Control Panel - Supero SC811TQ-600B User Manual

SC811 Chassis Manual
4-10 Other Components

Changing the DVD-ROM

1. Power down the system as described in Section 4-2 and remove the cover..
2. Disconnect the power cord and data cables from the DVD-ROM drive to other
chassis components including the motherboard and backplane.
3. Remove the failed DVD-ROM drive by depressing the release tab, then pull-
ing the drive out of the chassis.
4. Insert the new DVD-ROM drive unit in the slot until the tab locks into place.
5. Connect the data cables and power cord to the backplane and motherboard.
6. For more information, see the manual for your backplane in the appendix of
this document.

Changing the Control Panel

1. Power down the system as described in Section 4-2 and remove the cover..
2. Disconnect the power cord and data cables from the control panel to other
chassis components including the motherboard and backplane.
3. Remove the control panel by depressing the release tab (or removing the
screws), then pull the unit out of the chassis.
4. Insert the new control panel unit into the slot until the tab locks into place.
5. Connect the data and power cables to the backplane and motherboard. For
more information, see the manual for your backplane in the appendix of this
document.
4-12