Installing The Motherboard - Supero SC811TQ-600B User Manual

4-5

Installing the Motherboard

Remove this screw
Figure 4-4. Removing the Riser Card Bracket
Installing the Motherboard
1. Review the documentation that came with your motherboard. Become familiar
with component placement, requirements, precautions, and cable connec-
tions.
2. Power down the system as described in Section 4-2 and remove the cover.
3. Remove the two screws holding the riser card bracket in place.
4. Remove the bracket from the chassis.
5. Locate the mylar sheet in the accessories package and place the sheet into
the chassis.
6. Carefully place the motherboard in the chassis. You must align the I/O shield
with the motherboard ports.
Chapter 4: Chassis Setup and Maintenance
Riser Card Bracket
4-5
Remove this screw