Motor Vibration; Ovrvoltage - INVT Goodrive 200 Operation Manual

Yes
Check the load and
adjust
Motor vibration or
abnormal noise
Check the motor parameter
or motor type is right or not
Yes
Perform parameter
autotune or not
Yes
If set right V/F vibration
parameter or not
Yes
Check if there is abnormal
vibration to the reference
frequency
No
Check if there is abnormal
vibration to the load
No
If the inverter fault, please
contact with the company
OV fault
Check if the voltage range is in
the standard one or not ?
Yes
Check If UVW is short
circuited to to the earth and
the configuration of the output
side is right or not?
Yes
Check if the ACC/DEC
time is too short
No
Check if the load
motor is in abnormal
reverse running
No
If the it is the inverter
fault, please contact with
the company
Please set right
No
motor type and
parameters
No
Perform right
parameter autotune
No
Set right
parameters
Check the
Yes
reference
frequency
Yes
Check the load
No
Ensure the power supply
meets the need
Yes
Settle the short circuit
and confabulate rightly
Yes
Check if the ACC/DEC
time can be shortened
No
Check if it
needs to use
the options
No
Adjust the braking
options and the resistor
Yes
Shorten the ACC/DEC
time
Yes
Add braking optionds