Modify Hmt140 Description; Check Transmission Status - Vaisala HMT140 User Manual

Disconnect the HMT140 Configuration Cable from the
11
HMT140 and wait eight seconds.
Press the SERVICE button on the HMT140.
12
Optional: Enter a name for the saved settings on the
Set up tab in the Saved Settings field and click the
disk icon to save. If the HMT140 is used with more than
one wireless network, enter a name in the Saved Net-
work Settings field and click Save. Other network set-
tings files can be saved and recalled from the Saved
Settings field.

Modify HMT140 Description

If you want to make it easier to identify specific HMT140 data
loggers, enter custom names. By default, each HMT140 is
identified using the model name and channel type.
Note:
To modify your HMT140 name and Channel descriptions:
Complete steps 1 to 6 in the procedure, Modify
1
Transmission Settings, on page 28.
Select the Description tab and enter a name, and/or
2
Channel descriptions. You can view these descriptions in
viewLinc, and make changes in viewLinc if required.

Check Transmission status

The Status page displays the current state of the IP settings,
connection status, signal strength, and battery life
parameters, as applied using the Update button on the
Network tab.
To monitor the transmission status:
On the Status tab, click Get to update the HMT140
1
Utility window with the latest status information: IP
settings, WLAN and Sensor battery. If successful, the
HMT140 Utility displays the information on the Status
page.
M211488EN-E
Check with your network administrator before
making changes.
Custom Settings
31