Vaisala HMT140 User Manual page 33

For example, if you select 15 minutes for the Transmit
Period, and 3 for the number of Tries, the HMT140 will
attempt to transmit every 15 minutes. If it cannot trans-
mit, it will make 3 transmission attempts, then will go
into 'sleep' mode until the next scheduled transmit
period.
Logging Period:
I/O into the log buffer.
Note:
Enable Beeper:
button control of the Beeper (whether you want to be
able to turn the Beeper on or off with the push button on
the HMT140). It is also possible to turn the Beeper on
and off by holding down the SERVICE button for approx-
imately five seconds.
Note:
M211488EN-E
Specify how often the HMT140 will log
When setting up a new HMT140, you can click
Retrieve, to view current settings.
Select the option to enable or disable the
The Beeper is enabled by default. There is no
external Beeper status indicator. It must be
enabled/disabled with the SERVICE button.
Custom Settings
29