Hmt140 Function Modes; Operating Modes - Vaisala HMT140 User Manual

Read WLAN status:
3
Connection:
•
•
•
•
Signal Strength:
tions. The signal strength can vary from reading to read-
ing. Multiple samples should be taken to determine the
signal strength.
Channel:
Auto Find feature or the channel set in the Setup page. If
the HMT140 cannot find a channel when in Auto Find
mode, the utility will display "none".
Check HMT140 battery status:
4
Est. Life:
Est. Expired:
changed (dependant on the Transmit Period and the
number of alarms). For more information see, Viewing
Battery Life Remaining on page 37.

HMT140 Function Modes

Operating Modes

The HMT140 operates in two modes: Config mode and
Transmitter mode.
Config Mode
When the HMT140 is powered on, and the HMT140
Configuration Cable is connected to it, the HMT140 connects
to the network for about two seconds and then goes to sleep.
M211488EN-E
The HMT140 has failed to connect to a wireless
Failed:
network.
Associated - Not Connected:
associated with the network but has not connected.
Authenticated - Not Connected:
have been authenticated but has not connected.
Assoc/Authen - Connected:
associated and authenticated to the network and
connected successfully to the network.
Signal strength of the last communica-
This is the channel found during the Channel
Estimated percentage remaining of the battery.
Estimated date when the battery should be
HMT140 Function Modes
The HMT140 has
Security settings
The HMT140 has
33