Modify Hmt140 Description; Check Transmission Status - Vaisala HMT140 User Manual

10. Select the Status tab to check that the settings appear as configured. Click Get if they do
not appear automatically.
11. Disconnect the HMT140 Configuration Cable from the HMT140 and wait eight seconds.
12. Press the SERVICE button on the HMT140.
Optional: Enter a name for the saved settings on the Set up tab in the Saved Settings
field and click the disk icon to save. If the HMT140 is used with more than one wireless
network, enter a name in the Saved Network Settings field and click Save. Other network
settings files can be saved and recalled from the Saved Settings field.
More Information
‣ Options and Accessories (page 10)
‣ Battery Usage (page 36)
‣ Viewing Battery Life Remaining (page 36)
4.2.2 Modify HMT140 Description
If you want to make it easier to identify specific HMT140 data loggers, enter custom names. By
default, each HMT140 is identified using the model name and channel type.
Check with your network administrator before making changes.
To modify your HMT140 name and channel descriptions:
1. Complete steps 1 to 6 in
2. Select the Description tab and enter a name, and/or Channel descriptions. You can view
these descriptions in viewLinc, and make changes in viewLinc if required.
4.2.3 Check Transmission Status
The Status page displays the current state of the IP settings, connection status, signal
strength, and battery life parameters, as applied using the Update button on the Network tab.
Modify Transmission Settings (page
Chapter 4 – Set Up and Operation
28).
31