Passwords - Vaisala HMT140 User Manual

the Utility will force the Destination Port to use this
entered number. Use this feature to force the Destination
Port to another value other than the default 6767.

Passwords

To improve security, you can require that a user log in to
make changes to HMT140 parameters. If Passwords are
enabled, a password prompt appears when a user clicks
Update on the Setup tab. No other HMT140 functions will
require a login password.
To set, change or remove an HMT140 password:
Open the HMT140 Utility.
1
Connect the HMT140 to your computer.
2
From the Options menu, select Advanced Options.
3
On the Advanced Options window, check Enable use
4
of passwords in HMT140, then click OK.
To set the password for the first time:
5
• Leave the Current Password field blank.
• Check the Change Password option.
• Enter the new password in the New Password and
• Click Update.
To change an existing password:
6
• Enter the current password
• Check the Change Password option.
• Enter the new password in the New Password and
• Click Update.
To clear a password:
7
• Enter the current password.
• Check the Change Password option, and leave the
• Click Update.
CAUTION:Record the password in a safe location for safe-
M211488EN-E
New Password Again fields.
New Password Again fields.
New Password and New Password Again fields
blank.
keeping; the HMT140 does not save the pass-
Advanced Options
41