Toyota Highlander Service Manual page 98

98
2. Instrument cluster
Stop & Start system information (if equipped)
Stop & Start system operation time (current)/status notification
■
Displays the current amount of time the engine has been stopped
due to the operation of the Stop & Start system. Also shows the sta-
tus of the Stop & Start system with a pop-up display. (→P. 303)
Stop & Start system operation time (after start/after reset)
■
Displays the accumulated total of the following:
• Stop & Start system operation time since engine start
• Stop & Start system operation time since display was reset
Stop & Start system settings
■
Press the center button of the meter control switches to display the
Stop & Start system settings screen.
On this screen, the following operations can be performed:
● Stop & Start
The length of time the Stop & Start system will operate when the "A/C"
switch of the air conditioning system is on can be set to 2 different lev-
els. This setting can also be changed on
● Reset
Select to reset the Stop & Start system operation time display.
To reset, move the cursor to "Reset", and then press and hold the center
button.
HIGHLANDER_U (OM0E017U)
.