Toyota Highlander Service Manual page 627

Fully depress the secondary
4
latch (A) and install the bracket
(B) to the hoist assembly (C).
Lay the tire on the ground with
5
the outer surface (valve stem)
facing up.
When stowing the tire, make
6
sure that the hoist assembly is
placed perpendicular to the
wheel opening.
Using the jack handle and adapter socket, tighten the spare tire
7
clamp bolt by turning it clockwise until the tire is in the correct posi-
tion and two clicks are heard as the jack handle skips.
HIGHLANDER_U (OM0E017U)
8-2. Steps to take in an emergency
627
Valve stem
8