Toyota Highlander Service Manual page 302

302
4-5. Using the driving support systems
■
The Stop & Start system protection function
●
Vehicles without a smart key system: When an excessively loud sound is
being projected by the audio system, the audio system may be automati-
cally cut off in order to reduce battery consumption. If this occurs, turn the
engine switch off, wait for 3 seconds or longer and then turn it to the "ACC"
or "ON" position to re-enable the audio system.
Vehicles with a smart key system: When an excessively loud sound is being
projected by the audio system, the audio system may be automatically cut
off in order to reduce battery consumption. If this occurs, turn the engine
switch off, wait for 3 seconds or longer and then turn it to ACCESSORY
mode or IGNITION ON mode to re-enable the audio system.
●
The audio system may not be activated when the battery terminals are dis-
connected and then reconnected. If this occurs, turn the engine switch off
and then repeat the following operation twice to activate the audio system
normally.
• Vehicles without a smart key system: Turn the engine switch to the "ON"
position and then to the "Lock" position.
• Vehicles with a smart key system: Turn the engine switch to IGNITION
ON mode and then to OFF.
■
Replacing the battery
→P. 642
■
Displaying the Stop & Start system status
→P. 98
HIGHLANDER_U (OM0E017U)