Toyota Highlander Service Manual page 229

Power mode (if equipped)
■
Use power mode for powerful acceleration or driving in mountain-
ous regions.
Press "<" or ">" of the meter
1
control switches, select
Press "∧" or "∨" of the meter
2
control
"PWR MODE".
The "PWR MODE" indicator will
be displayed on the multi-infor-
mation display.
Select "PWR MODE" again to
cancel power mode.
Selecting shift ranges in the S position
To enter S mode, shift the shift lever to S. Shift ranges can be selected
by operating the shift lever, allowing you to drive in the shift range of
your choosing. The shift range can be selected by the shift lever.
Upshifting
1
Downshifting
2
8-speed models: The selected shift
range, from 1 to 8, will be dis-
played on the multi-information dis-
play.
The initial shift range in S mode is
set automatically to 6, 5 or 4
according to vehicle speed. How-
ever, the initial shift range may be
set to 3 if AI-SHIFT has operated
while the shift lever was in D.
(→P. 234)
6-speed models: The selected shift
range, from 1 to 6, will be dis-
played on the multi-information dis-
play.
The initial shift range in S mode is set automatically to 5 or 4 according to
vehicle speed. However, the initial shift range may be set to 3 if AI-SHIFT
has operated while the shift lever was in D. (→P. 232)
HIGHLANDER_U (OM0E017U)
.
switches, select
4-2. Driving procedures
229
4