Toyota Highlander Service Manual page 293

Selecting constant speed control mode
When constant speed control mode is selected, your vehicle will main-
tain a set speed without controlling the vehicle-to-vehicle distance.
Select this mode only when vehicle-to-vehicle distance control mode
does not function correctly due to a dirty radar sensor, etc.
With the cruise control off,
1
press and hold the "ON-OFF"
button for 1.5 seconds or more.
Immediately after the "ON-OFF"
button is pressed, the radar cruise
control indicator will come on.
Afterwards, it switches to the cruise
control indicator.
Switching to constant speed con-
trol mode is only possible when
operating the lever with the cruise
control off.
Accelerate or decelerate, with
2
accelerator pedal operation, to
the desired
(above approximately 30 mph
[50 km/h]) and push the lever
down to set the speed.
Cruise control "SET" indicator will
come on.
The vehicle speed at the moment the lever is released becomes the set
speed.
Adjusting the speed setting: →P. 290
Canceling and resuming the speed setting: →P. 292
HIGHLANDER_U (OM0E017U)
4-5. Using the driving support systems
vehicle speed
293
4