Toyota Highlander Service Manual page 601

2017 year
Hide thumbs Also See for Highlander:
Table of Contents

Advertisement

Warning message
(U.S.A. only)
(U.S.A. only)
(Flashes)
HIGHLANDER_U (OM0E017U)
8-2. Steps to take in an emergency
Details/Actions
Indicates that all maintenance according to the
driven distance on the maintenance schedule*
should be performed soon.
Comes on approximately 4500 miles (7200 km)
after the message has been reset.
→ If necessary, perform maintenance.
Indicates that all maintenance is required to cor-
respond to the driven distance on the mainte-
nance schedule*.
Comes on approximately 5000 miles (8000 km)
after the message has been reset.
(The indicator will not work properly unless the
message has been reset.)
→ Perform
the
necessary
Please reset the message after the mainte-
nance is performed (→P. 508)
Indicates that the Automatic High Beam switch is
pressed while the headlights are in low beam.
→ Turn the high beam on and press the Auto-
matic High Beam switch again.
Indicates that, since the VSC (Vehicle Stability
Control) system was turned off, the pre-collision
brake system operation is stopped
→ Turn the VSC on. (→P. 334)
Indicates that the pre-collision system is tempo-
rarily unavailable
→ Please wait until the system returns. If the
message does not disappear, the system
may be malfunctioning. Have the vehicle
inspected by your Toyota dealer immedi-
ately.
601
maintenance.
8

Hide quick links:

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents