Toyota Highlander Service Manual page 93

Changing the trip meter display
Switches between the trip meter
"A" and "B" displays. When the trip
meter is displayed, pressing and
holding the knob will reset the trip
meter.
Instrument panel light control
The brightness of the meter panel lights can be adjusted.
Pressing the button will adjust the
brightness of the meter panel
lights.
The brightness level of the meters
when the surroundings are bright
(day mode) and dark (night mode)
can be adjusted individually. How-
ever, when in day mode, adjusting
the brightness
change the brightness level of
night mode.
■
The meters and display illuminate when
Vehicles without a smart key system

The engine switch is in the "ON" position.
Vehicles with a smart key system

The engine switch is in IGNITION ON mode.
■
Outside temperature display
In the following situations, the correct outside temperature may not be dis-
played, or the display may take longer than normal to change.
●
When stopped, or driving at low speeds (less than 12 mph [20 km/h])
●
When the outside temperature has changed suddenly (at the entrance/exit
of a garage, tunnel, etc.)
■ Stop & Start system operation time (current) (if equipped)
This display will be displayed when the engine is stopped due to the opera-
tion of the Stop & Start system.
HIGHLANDER_U (OM0E017U)
level will also
2. Instrument cluster
93
2