Toyota Highlander Service Manual page 565

Rear turn signal lights
■
Open the back door and
1
remove the cover.
Insert a flathead screwdriver
into the cover and remove it as
shown in the illustration.
To prevent damaging the vehi-
cle, wrap the flathead screw-
driver with a tape.
Remove the 2 screws, and
2
remove the lamp assembly
by pulling it directly backward
from the rear of the vehicle.
Remove the wire harness.
3
Turn the bulb base counterclockwise.
4
HIGHLANDER_U (OM0E017U)
7-3. Do-it-yourself maintenance
565
7