Waveform Pop-Up Menu (Waveform Display) - Tektronix WFM2200A User Manual

Waveform pop-up menu
(Waveform display)
WFM2300 and WFM2200A Waveform Monitors User Manual
■ Horizontal axis units: Shows the units for the tick marks on the 0 mV axis
of the graticule. The axis units change depending on the sweep and
magnification settings and the video input format.
■ Color space: Shows the currently displayed waveform color space. Dashes
(--) indicate components not displayed.
■ H and V positions: When you press the POS button to adjust the position of
the waveform trace, a position readout appears with a knob icon to indicate
whether the horizontal or vertical position is the focus of the General knob.
■ Field and line numbers: Shows the currently selected video field and line
numbers when Line Select mode is enabled. See also
page 159.
■ Volt1, Volt2, Time1, Time2, and Delta: Shows the current position of the
voltage or time cursors and the distance between them when the cursors are
enabled. See also MAG, GAIN, SWEEP, and CURSOR buttons
Press and hold the WFM button to open the Waveform pop-up menu. The pop-up
menu enables you to configure the display type, style, and mode used in the
selected Waveform tile. The following menu selections are available:
Display type. Select from the following display types:
■ Waveform - Displays a voltage versus time plot of the selected SDI input
signal (SDI A or SDI B).
■ LTC Waveform - Displays a voltage versus time plot of the LTC input
signal (LTC IN). See
■ Ref Waveform - Displays a voltage versus time plot of the external reference
input signal (REF IN). See
Display style. Select the style for how the SDI signal components are displayed:
■ Parade - has all the components shown one beside the other.
■ Overlay - has all the components drawn at the same location so that they
appear one on top of the other.
Y, R, G, B components. Select to turn on or off the display of the individual video
components: Luma (Y), Red (R), Green (G), or Blue (B).
LTC Waveform display on page 101.
External Reference Waveform display
Display modes
Line Select on
on page 151.
on page 92.
149