Jcu–3 - FLIR M100SERIES Nstallation & Operation Instructions

JCU–3
The JCU-3 joystick control unit is included in camera system packs, and is also
available to purchase as a separate accessory. The unit is supplied with both a
portrait-oriented keypad (fitted), and a landscape-oriented keypad.
For information on other accessories, see
Note: Your M100/M200-Series thermal camera is also compatible with the following
joystick control units, provided with other FLIR and Raymarine camera systems:
• JCU-1 (part no. 500-0385-00) — joystick control unit for FLIR M-Series and
Raymarine T-Series cameras
• JCU-2 (part no. 500-0398-00) — joystick control unit for FLIR M400-Series,
MV-Series and MU-Series cameras
Parts supplied
The parts supplied with the keypad are shown below.
1. JCU-3 keypad
2. Landscape keypad mat
3. Portrait keypad mat (supplied fitted to the unit)
4. Mounting gasket
5. 4 x mounting fixings
6. Documentation pack
7. Right angled power cable 2 m (6.6 ft.)
8. RayNet network cable 2 m (6.6 ft.)
Planning the installation
Chapter 10 Spares and accessories.
25