Operation And Features Overview - FLIR M100SERIES Nstallation & Operation Instructions

6.2 Operation and features overview

The camera features can be accessed using a web browser running on an IP-capable
device (for example, a laptop or PC) attached to the same network as the camera,
using a dedicated JCU (Joystick control unit), or using the thermal camera application
of a compatible LightHouse™-powered Raymarine multifunction display.
Note: A Joystick control unit (JCU) or LightHouse™-powered Raymarine multifunction
display (MFD) is not required to operate the camera; a web browser connected
to the camera's web server is sufficient.
This handbook covers access methods using a web browser or JCU-3 unit. For details
on how to operate this product using a compatible LightHouse™-powered Raymarine
multifunction display please refer to the thermal camera application section of the
manual supplied with your multifunction display.
The main thermal camera operations are outlined below:
Control the camera:
• Power-on/power-off
• Pan and tilt (tilt only for M100–Series)
• Zoom
• Home position
• Capture and save the camera image
• Surveillance mode
Adjust the camera image:
• Color palette
• Scene presets
• Reverse polarity
In addition to the above, the camera's web interface also provides setup menus to
configure the system to your requirements.
66