Table of Contents
Advertisement
Functionality of the Main Menu
Default
Items
Value
IMD ID
0
IMD NAME
XXXXXXXX
BAUD RATE
38400
OSD
TLY
RG
MODE
IMD TLY MODE T1
TLY SOURCE
STANDARD
Domain Range
TSL3.1: Use the
TSLV3.1 protocol
setting to control.
TSL4.0: Use the
TSLV4.0 protocol
setting to control.
IMAGE VIDEO: Use
the Image video
protocol setting to
control.
UDP: Use the UDP
protocol setting to
control.
0~255
9600/19200/38400
RG: Red/Green
GR: Green only
RGY:
Red/Green/Yellow
OFF: No tally light
T1/T2/T1T2/T2T1/T1-/
T2-/T1T2-/T2T1-
STANDARD: Use
the Standard setting
to control tally via
contact closure on
GPI tally.
IMAGE VIDEO 422:
Use the setting to
44
Description
Set the ID number for
each monitor
Set an IMD name for
each screen.
Select a baud rate for
communication.
V3.1 and TSL V4.0 is
38400, Image video is
one
of
9600/19200/38400.
Select the OSD Tally
mode. Only the TALLY
SOURCE
STANDARD
STANDARD + IV422,
the setting is available.
Select the IMD Tally
mode.
Use this setting when
using the Image Video
tally control, this setting
will determine the state
which is selected.
Select the source for
tally source
TSL
the
is
or
Advertisement
Table of Contents
