Table of Contents
Advertisement
MVM Monitor Features
Timecode
5.
It is displayed at the bottom of the image, the format is HH:MM:SS:FF,
if there is no timecode available, the monitor will display --:--:--:--. You
can set its parameters in OSD CONFIG menu.
OSD TALLY
6.
It is displayed OSD TALLY rectangle at the both sides of IMD bar, in
the bottom of each display window, and the color could be changed
according to the designated color (red, green, yellow, white). You can
set its parameters in OSD CONFIG menu.
IMD
7.
The IMD text displays at the bottom of the screen, the length can't
exceed 16 characters, and you can choose letter, number or other
character for it. You can set its parameters in OSD CONFIG menu.
There are several display modes for MVM-200 display: Single-screen,
Four equal screens, and One-big and with Three-small Screen.
Figure 4-2 Single-screen, full 16-channel audio meter
14
Advertisement
Table of Contents
