Unpack and Installation
Videowall Installation
The MVM-200 series monitors support compact installation for videowall.
Firstly, mount the wallmount brackets to the rear panel of the monitor,
fasten them, then, mount the monitor onto the videowall frame steadily
and firmly. Buckle the monitor with the hanger at the right top of the
monitor on the rear panel to lock the monitor in case of unexpected
rollover.
Installation for the extra control buttons bar:
You can use the control buttons on the top of the monitor, or you can
amount an extra control buttons bar at the bottom of the monitor. The
Figure 3-3 Hanger Usage
Figure 3-4 Wallmount Installation
10