Download Print this page

Gesamte Exposition; Aktiver Datensatz; Total Exposure; Active Selection - Dräger X-am 7000 Manual

Multi-gas monitor
Hide thumbs Also See for X-am 7000:

Advertisement

Gesamte Exposition

— Mit dieser Funktion kann die Alarmschwelle für den Expositionsa-
larm TWA eingestellt werden.
Nacheinander » Einstellungen \ Sensoren \ CA–CO \ Expo-
Param. \ gesamte Expos. « auswählen und jeweils durch Drücken
der Taste »
« aufrufen.
OK
Gewünschte Konfiguration aus der Liste auswählen und mit Taste
»
« aktivieren (»
«), sofern mehr als eine Konfiguration akti-
OK
vierbar gemacht wurde, siehe » Auswahl Datensatz « Seite 56.
Gesamtexposition (Wert in ppm) mit den Tasten »
einstellen und mit der Taste »
Einstellbereich: 0 bis eingestellter Messbereichsendwert.

Aktiver Datensatz

— Mit dieser Funktion kann für jeden Sensor aus einer Anzahl von
Datensätzen (1 bis 5) einer aktiviert werden.
Nacheinander » Einstellungen \ Sensoren \ CA–CH4 \ Kfg-
Datensätze \ aktiv.Datensatz « auswählen und jeweils durch
Drücken der Taste »
« aufrufen.
OK
Gewünschten Datensatz aus der Liste auswählen und mit
Taste »
« aktivieren (»
OK
« und »
« bestätigen.
OK
«).

Total exposure

— This function can be used to set the alarm threshold for the
exposure alarm TWA.
Select the menu items » Settings \ Sensors \ CA–CO \ Expo-
Param. \ Total exposure « in this order, pressing the »
after each selection.
If more than one configuration has been made available for activation
(see » Select status « on page 56), select the desired configuration
from the list and press the »
«
Use the »
« and »
M
and press the »
« key to confirm the setting.
OK
Adjustable range: 0 to the entered measuring range's end value.

Active selection

— This function can be used to activate one of several (1 to 5) status
records for each sensor.
Select the menu items » Settings \ Sensors \ CA–CH4 \ Cfg. \
Active selection « in this order, pressing the »
selection.
Select the desired status record from the list and press the
»
« key to activate it (»
OK
OK
« key to activate it (»
OK
« keys to set the total exposure (in ppm)
M
« key after each
OK
«).
« key
«).
55

Hide quick links:

Advertisement

loading