Remove the controller ECA
The controller ECA (TDP-S3: 510-1579-xx; TDP-T3: 510-1530-xx) mounts to the top of the metal
chassis above the optical engine and power supply. It is fastens to the chassis with eight screws, and it
connects to the DMD ECA on the optical engine through a direct connector on the bottom of the
controller.
WARNING Be sure to take proper ESD precautions while working near the controller ECA. It can be easily
damaged by static electricity.
1
Remove the following items:
Focus and zoom rings (see page 11)
Front bezel and bezel vent (see page 13)
Top case (see page 20)
Speaker assembly (see page 24)
2
Unplug the four fan and blower cables, and the color wheel ribbon cable.
TDP-S3/TDP-T3/TDP-MT5 Service Manual
29